1, Model:DCEC Cummins 6BTAA5.9-G2, 4-cycle
2, Standby Power:114KW / 143KVA 50HZ
3, Prime Power: 104KW / 130KVA 50HZ
3, Air Intake System:Turbo, Water/Air cooling
4, Fuel System:PN type fuel pump
5, Cylinder Arrangement:6 in line
6, Rated RPM:1500rpm
7, Governor Type:Electronic
8, Protection Grade:IP23
9, Connecting Type:3 Phase and 4 Wires, “Y” type connecting
4 Wire Diesel Generator Cummins With Two12V Batteries
Standby Power(50Hz) |
114KW / 143KVA |
Prime Power(50Hz) |
104KW / 130KVA |
Dimension & Weight
Open Type with Base Fuel Tank |
Overall Size: 2320(mm)×860(mm)×1780(mm) |
Weight: 1360 kg |
General Features: |
Engine(DCEC Cummins 6BTAA5.9-G2) |
Radiator 50OC max, fans are driven by belt, with safety guard |
24V charge alternator |
Alternator: single bearing alternator IP23, insulation class H/H |
Absorber |
Dry type air filter, fuel filter, oil filter |
Main line circuit breaker |
Standard control panel |
Two12V batteries, rack and cable |
Ripple flex exhaust pipe, exhaust siphon, flange, muffler |
User manual |
Engine Data
Manufacturer / Model: |
DCEC Cummins 6BTAA5.9-G2, 4-cycle |
Air Intake System: |
Turbo, Air/Air Cooling |
Fuel System: |
PN type fuel pump |
Cylinder Arrangement: |
6 in line |
Displacement: |
5.9L |
Bore and Stroke: |
102*120(mm) |
Compression Ratio: |
16.0:1 |
Rated RPM: |
1500rpm |
Max. Standby Power at Rated RPM: |
130KW/176HP |
Governor Type: |
Electronic |
Exhaust System |
|
Exhaust Gas Flow: |
19.44m3/min |
Exhaust Temperature: |
495℃ |
Max Back Pressure: |
10kPa |
Air Intake System |
|
Max Intake Restriction: |
6.35kPa |
Burning Capacity: |
8.7m3/min |
Air Flow: |
190m3/min |
Fuel System |
|
100%( Prime Power) Load: |
208 g/Kw.h |
75%(Prime Power) Load: |
212 g/Kw.h |
50%(Prime Power) Load:: |
219 g/Kw.h |
100%( Prime Power) Load: |
27.8L/h |
Oil System |
|
Total Oil Capacity: |
16.4L |
Oil Consumption: |
≤4g/kwh |
Engine Oil Tank Capacity: |
14.2L |
Oil Pressure at Rated RPM: |
345kPa |
Cooling System |
|
Total Coolant Capacity: |
29L |
Thermostat: |
82-95℃ |
Max Water Temperature: |
104℃ |
Alternator SpecifiCAT-parts-partsion
GENERAL DATA
Compliance with GB755, BS5000, VDE0530, NEMAMG1-22, IED34-1, CSA22.2 and AS1359 standards.
Alternator Data
Number of Phase: |
3 |
Connecting Type: |
3 Phase and 4 Wires, “Y” type connecting |
Number of Bearing: |
1 |
Power Factor: |
0.8 |
Protection Grade: |
IP23 |
Altitude: |
≤1000m |
Exciter Type: |
Brushless, self-exciting |
Insulation Class, Temperature Rise: |
H/H |
Telephone Influence Factor (TIF): |
<50 |
THF: |
<2% |
Voltage Regulation, Steady State: |
≤±1% |
Alternator Capacity: |
140KVA |
Alternator Efficiencies: |
91.7% |
Air Cooling Flow: |
0.514m3/s |
Generating set data:
Voltage Regulation: |
≥±5% |
Voltage Regulation, Stead State: |
≤±1% |
Sudden Voltage Warp (100% Sudden Reduce): |
≤+25% |
Sudden Voltage Warp (Sudden Increase): |
≤-20% |
Voltage Stable Time (100% Sudden Reduce): |
≤6S |
Voltage Stable Time (Sudden Increase) |
≤6S |
Frequency Regulation, Stead State: |
≤5% |
Frequency Waving: |
≤0.5% |
Sudden Frequency Warp (100% Sudden Reduce): |
≤+12% |
Sudden Frequency Warp (Sudden Increase): |
≤-10% |
Frequency Recovery Time (100% Sudden Reduce): |
≤5S |
Frequency Recovery Time (Sudden Increase): |
≤5S |
Options
Competitive Advantage:
High Performance of loading Easy start
Nice protection User-friendly operation
Low running cost Environmental Long service life