1. Model Number :DSE5510
2. Name : Eco - Friendly Deep Sea Control Panel

We are authorized agent

Deep Sea Electronics PLC Integral CAN interface to connect to the industry standard CAN

‘Eco-friendly’engine management systems providing engine protection and instrumentation without

requiring additional senders.

Advanced communiCAT-parts-partsions port allowing up to 16 generators to load share (kW / kVAr) with Dead Bus

control, starting and stopping independent sets in the system according to load demand, balancing engine

hours across multiple sets and much more.

Full Power monitoring instrumentation and powerful auto-sync functions as standard. The inclusion of

autosync allows the OEM to offer the choice of synchronising, load sharing, soft ramping transfers to and

from the genset etc.

Simply use the 5510 with it’s built in governor and AVR control functions (Requires connection to a suitable

electronic governor and AVR) Integral mains decoupling function including ROCOF/vector shift for mains

parallel appliCAT-parts-partsions Remote communiCAT-parts-partsion via RS232 or RS485 port (specify on ordering).

RS232 provides Modem link to PC via either PSTN line or GSM network (using a suitable modem). The

module can also signal Engineers via their cell phones using the GSM SMS messaging system to advise of

system alarms.RS485 provides a ‘Modbus’ interface.

Using industry standard communiCAT-parts-partsion protocol allows full system integration into new and existing building

management and control schemes. PIN number protected front panel programming of selected trip points

and timers, allows field changes to be made to the module settings. Comprehensive PC configuration and

status monitoring using the 55xx PC software.

Clear engine diagnostic information removes the need for both service equipment and cryptic diagnostic

lamp (when used in conjunction with CAN engines. MTU, Volvo, Perkins, Scania, , Iveco, Detroit,

Cummins. Contact us for further details) Built in exercise timer, that can be set for weekly or monthly

intervals. LCD 4-line text based display to provide ‘at-a-glance’ diagnosis of fault conditions,

instrumentation and operating state.

Dimensions: 240mm x 172mm x 57mm Panel Cutout: 220mm x 160mm ( 8.7” x 6.3”)