Atlas Copco Spare Parts Screw Air Compressor Lubricants 2901076900

We supply the Atlas screw air compressor oil , Atlas screw air compressor oil , Atlas screw air compressor

lubricants 2901076900,2901077000, 2908850700, 2908850800, 2908850101,2901052200,2901004501,

2908850000, 2901170100, 2901170200

Pour point and pour point : pour point is required under the cooling conditions in the oil stopped flowing the

maximum temperature. Coagulation and solidifiCAT-parts-partsion of the oil pure compounds are very different . No clear oil and

the solidifiCAT-parts-partsion temperature , the term " solidifiCAT-parts-partsion " only as a whole loses fluidity , not all components are turned

into a solid. LubriCAT-parts-partsing oil pour point is an important quality indiCAT-parts-partsors of low temperature fluidity .

For the production , transport and use are important. High pour point oil can not be used at low temperatures. In

contrast , at higher temperatures the area is not necessary to use a low pour point oil. Because the lower the pour

point of lubriCAT-parts-partsing oil , the higher the cost of production , resulting in unnecessary waste. In general, the pour point

of lubriCAT-parts-partsing oil should be higher than the minimum ambient temperature is low 5 ~ 7.

But particularly also to mention that in the selection of low-temperature lubricants , should be combined with oil

pour point , low viscosity and viscosity-temperature characteristics fully into account. Because of low pour point oil , and its low viscosity and viscosity-temperature characteristics may also not meet the requirements .

Pour point and the pour point of the oil is low temperature fluidity index , the difference unprincipled only slightly

different measurement method . Same oil pour point and pour point is not entirely equal, generally pour point higher

than the pour point 2 ~ 3 , but there are exceptions .