Comap Diesel Generator Controller Accessory Model DKG155 Self-Starting Control

product presentation:

DKG155 Self-starting controller set measurement, control protection (such as: low oil pressure, high water temperature, low fuel level, underspeed, overspeed, underfrequency, overfrequency, undervoltage, overvoltage, overvoltage, overcurrent, overload, etc.), display (such as: oil pressure, water temperature, oil level, generating voltage, current, speed, generating frequency, power, power factor, electric energy, running time, start-up times, fault list, auxiliary input And output function, etc., can be seen directly from the LCD screen of the front panel) and many other functions as one, super wide (8V-35V) DC working voltage, can meet the generator users for different types of generator set automatic control needs. The module contains a powerful microprocessor, which can realize a series of complex functions: the user can switch the LCD display interface in Chinese or English. The controller can realize the monitoring, early warning and shutdown of the unit's running state and fault situation; The user can set various parameters of the controller on the panel according to the needs of the unit (such as: current transformer, number of flywheel teeth, idle time, etc.); Users can connect to PC through RS232 or USB special communiCAT-parts-partsion interface for various control mode configuration, parameter setting and monitoring; 6 fully configurable auxiliary inputs (user programmable) and 6 auxiliary outputs for other functions such as starting, alerting or stopping; Users can use the extension module to provide a variety of extension I/O functions according to their needs; Self-start and stop generator set (controller is in "automatic" mode), when the mains voltage power off (install the mains power off relay, select an auxiliary input for mains status monitoring ", the unit will be self-start, and then supply power to the load, if the mains back, the unit will stop, mains power supply to the load.