Quiet And Convenient Small Gasoline Generator 220/380V 50/60HZ

Maintenance method:

After the new generator or mothballed generator is run in (for the first 50 hours), the following maintenance work shall be carried out:

Clean or replace the air filter

Replacement of engine oil

Replace or clean the filter element of the lubriCAT-parts-partsing oil filter

Re-tighten all parts of the bolts and nuts

The new generator should try to avoid sudden increase of load or high-speed operation, as far as possible to use the lubriCAT-parts-partsing oil recommended by the manufacturer, different grades of lubriCAT-parts-partsing oil do not mix, lubriCAT-parts-partsing oil contains a variety of additives, different grades of lubriCAT-parts-partsing oil mixed will reduce the lubriCAT-parts-partsion performance, leading to abnormal wear of moving parts.

When oil is injected into the fuel tank, the oil injection port should have a filter, and it is better to put a press cloth; The fuel should be placed in the tank for more than 24 hours to precipitate the water and impurities before use; The discharge plug of the daily fuel tank should be opened frequently at ordinary times to discharge the water and sediment at the bottom.

Regular maintenance and planned maintenance are the key to extend the service life of the engine. The maintenance cycle and maintenance items should be adjusted appropriately according to the usage, service condition and the properties of fuel oil and lubriCAT-parts-partsing oil. If necessary, maintenance should be carried out in advance, and professional technicians should complete the regular overhaul and maintenance as far as possible.

High-quality imported generating sets are often worth a lot of money. They should be used reasonably, pay attention to daily maintenance, prevent early wear and tear, extend their service life, and keep them in a good standby state of rapid start and input at all times, so as to truly make the best use of everything.

specifiCAT-parts-partsion parameter: