30 Amp Generator With Stamford Alternator
1. ATS AMF DeepSea Control Panel
2. Low fuel consumption,Super Silent
3. JAPAN Kubota series high efficiency diesel engines
30 Amp Kubota Diesel Generator With Stamford Alternator
Specifications:
Prime Power |
16KW/20KVA |
Standby Power |
18KW/22KVA |
Rated Speed |
1500RPM |
Output Frequency |
50HZ |
Phase |
3 |
Rated Voltage |
400V |
Engine Model |
V2203-E2BG |
Alternator Model |
PI 144D |
Fuel consumption of 100% load |
5.3L/H |
Fuel Consumption of 75% load |
4.0L/H |
Voltage Regulation Rate |
≤±1% |
Random Voltage Rate |
≤±1% |
Frequency Regulation Rate |
≤±5% |
Random Frequency Variation |
≤±0.5% |
Dimension (open type) |
1550X700X1000mm |
Weight (Open type) |
540kg |
Dimension (silent type) |
1850X800X1100mm |
Weight (Silent type) |
780kg |
Kubota engine V2230-E2BG specification:
Engine Model |
V2203-E2BG |
Number of Cylinder |
4 |
Cylinder arrangement |
Vertical in line |
Cycle |
Four stroke |
Aspiration |
Natural Aspiration |
Bore x Stroke (mm) |
87x92.4 |
Displacement |
2.197L |
Compression Ratio |
23.0:1 |
Prime power |
18.3kw |
Standby power |
20.1kw |
Speed Governor |
Mechanical |
Cooling system |
Water cooled |
Speed Stability% |
≤5% |
Total Lubrication System Capacity |
7.6L |
Coolant Capacity |
6.3L |
Fuel Consumption at 100% |
5.3L/Hr |
Starter Motor |
DC12V |
Alternator |
AC12V |
Control System
Harsen GU601A Genset Controller
Description:
The GU601A is an Automatic Start Control Module designed to automatically start and stop the Generator.The module also monitors and protects the engine, indicating operational status, fault conditions and metering on the front panel LCD and LED’s.
1.Configuration of parameters by front panel push buttons or by PC via mini USB interface with license free software.
2.Configurable fuel output energise to stop energise to run.
3.3Configurable inputs.
4.3 Configurable outputs.
5.2 Analogue inputs configurable for different senders for oil pressure and engine temperature.
6.True RMS measuring