GENUO Mechanical symmetry MS3R Series 3 Roller plate Rolling Machine .
MR3R series plate rolling machine with mechanical drive and adopts 3-roller symmetrical structure with the upper roiler moving vertically in the center between the two lower rollers, which is achieved through the drive of the screw,the nut,the worm and the lead screw,The two lower rollers rotates,and provides the plate materials with torque through the
engagement of the output gear of the moderator with the gear of the lower rollers.
When take away workpieces, upper roller can be separated.
Upon request, we can install kinds of side wheels to bend different types metal sheet.
This machine has the advantages of simple structure, stability and easy operation. It is an economical plate bending machine with high cost performance.

• Note:specification which above 25×2500 adopt hydraulic overturn discharge.
• Special specifications can be customized; length between 1000-4000 mm is optional.

Working Roller Roller is the most important components of the rolling machine, its quality and performance has a direct impact on the service life of the rolling machine and the precision of rolling. Working rollers are made of high-strength high-quality steel 42CrMo material, after forging, roughing, quenching and tempering, HB240 ~ 300, finishing after the intermediate frequency quenching HRC47-58, according to JB/ZG4289-86 roll steel standards. Strictly in roller manufacturing, to ensure its comprehensive mechanical properties.

Electrical Components Schneider Electric components ensure the stable operation of the machine. Reasonable line connection and arrangement greatly reduces the failure rate. The integrated control module of hydraulic valve group makes the sliding block move smoothly and accurately. And the operator and all parts of the machine played a good protection. It's safe, stable and not easy to break. Low Noise and Powerful motor guarantee the machine service life and improve the machine working stability.

Roller Rotation

Stepper Motor - Planetary Gearbox - Working Roll

Symmetric geometry in the roll movement featured by the 3-roll bending rolls of the series assures optimal traction.The upper roll can bend the plate by moving up and down, while the fixed lower roll can realize the plate rolling by turning forward and backward. The row self aligning bearing of the upper roll with low resistance plays a strong role in supporting and preventing the sheet from slipping to the maximum extent.

The machine is a three - roll symmetrical mechanical structure. The upper roller moves up and down in the center of the two lower rollers. Both nuts and worm gear act as drives. The two bottom rollers serve as the main driving rollers. By engaging, it rotates between the output gear of the transmission and the bottom roll,thus providing torque to the bending plate. Simple operation, convenient maintenance, high cost performance.