Mass data storage Multi-Function DC resistivity meter device for mine induced polarization survey

PRODUCT DESCRIPTION

WDJD-4A is a cutting-edge tool designed to provide high-accuracy measurements of direct current resistance. This advanced device is particularly suited for gauging the DC resistance of transformer windings and high-power inductive equipment.

FEATURES & FUNCTION

►For general resistivity and IP survey function, 8 types of electrode arrays are available. Electrode distance (namely “Schedule”) can be inputted or called. Geometric factor K can also be generated automatically or calculated manually.

►For multi-electrode 2D resistivity imaging function, 18 types of electrode arrays are available. Extendable cross-section roll-along scan measurement allows the measuring cross-section to be prolonged unlimitedly without adding more electrodes. It is suitable for long cross-section survey and for solving geologic problems under any condition with low cost and high efficiency.

►Schedule: the schedule can memorize 100 groups of electrode distances, avoiding repetitive input. Or you just input a schedule ID and set step to call the corresponding electrode distances.

► Earth resistance inspection: earthing condition can be inspected at any time.

► Mass data storage: WDJD-3A can memorize 3500 readings of data for resistivity and SP survey, 2500 readings of data for induced polarization (chargeability) survey and 43680 readings of data for multi-electrode 2D Resistivity Imaging.

► All parameter and data are under power-failure protection; and thus data will not be lost even thought the system shuts down accidentally.

► RS-232C port enables it to transfer data to computer.

►Diagnostic program finds fault or failure and damaged parts quickly and accurately.

► Sealed constitution: featuring waterproof and dustproof design, long life time and so on.

Utilizing state-of-the-art switch power technology, our instrument features a high-performance LCD display that allows for easy reading of measurement data. With its automatic arc extinction function, you can be assured of both enhanced accuracy and efficiency during testing procedures.

PRODUCT SPECIFICATION

Receiving unit

 Voltage channel: ± 6V, precision: if Vp≥10mV, ± 5‰ ± 1LSB; if Vp < 10mV, ±1% ± 1LSB.

 Input impedance: ≥50MΩ

 Apparent polarizability precision: ±1% ± 1LSB

 SP compensation range: ±1V

 Current channel: 5 A, precision: if Ip≥ 10mA, ± 5‰ ± 1 LSB; if Ip < 10 mA, ±1% ± 1 LSB.

 Suppression: ≥80dB for 50Hz frequency industrial and electrical interference (common mode interference or differential mode interference).

Transmitting unit

 Maximum transmitting power: 4500W (only when conducting general resistivity/IP survey. Regarding multi-electrode resistivity imaging, maximum transmitting power is 1125W which is limited by WDZJ-4 switcher

 Maximum voltage output: 900V (1800V peak to peak, only for general resistivity/IP survey. Regarding multi-electrode resistivity imaging, maximum transmitting voltage is 450V DC which is limited by WDZJ-4 switcher)

 Maximum current output: 5A (only for general resistivity/IP survey. Regarding multi-electrode resistivity imaging, maximum current output is 2.5A DC which is limited by WDZJ-4 switcher)

 Pulse width: 1~60s, duty ratio 1:1

Others

 Working temperature: -10℃~50℃, 95 %RH

 Storage temperature: -20℃~60℃

 Mainframe power source: eight size-D dry cells (or nickel-cadmium batteries of the same specification)

 Overall current: ≤ 55mA  Weight: ≤ 7 Kg  Dimension (L×W×H): 310mm x 210mm x 210mm

 Working temperature: -10°C~50°C

APPLICATION

CONTACT INFORMATION