High temperature coating printing machine for steel plate, coil and steel pipe Continuous Casting Machine

Product profile

Steel plate, plate coil, steel pipe jet printing function will be high temperature resistant coating or ink atomization in the form of dot spray characters on the surface of steel plate, plate coil and steel pipe.

Equipment model

TPH-S30A-B
A -- 1, 7, 9, 16 and 32 indicate the number of nozzles
B -- 2, 6 represents the form of printing actuator; 2 represents two-dimensional plane printing, 6 represents 6 degrees of freedom surface printing

Technical indicators

Paint color: white
Coating temperature: 800°C
Ink temperature: 260°C
Printing speed: 2 seconds per word for a solid typeface with a nozzle
7x5 dot matrix 140 characters/second
9x7 dot matrix 80 characters/second
16x10 dot matrix 60 characters/second
32x24 dot matrix 50 characters/second
Height: 10 mm to 150mm
Character width: 10 mm to 100mm
Print content: Computer editable arbitrary characters and graphics
Data management: printing data storage and network transmission
Protection level: 1965
Printing distance: 15 ~ 20mm

Spraying machine control system

High temperature coating: spray in square, rectangular billet, slab, steel plate and steel plate coil; Heat resistance of 800 ℃

The system adopts SIMENS S7-300 PLC intelligent control, can realize automatic operation, for the user needs to spray the number of words, number way, can be adjusted by the technical personnel or operators through HMI, draw the required number and English letter words, font; Generally: the size of the word is 60 ~ 150mm, using the optimized segmentation ratio, beautiful and generous; Control system options are: The local computer/upper remote/artificial three operating modes, such as switch is used, operation control system can be easily connected with user level 2 computer system, more convenient for the user to run the automatic command attemper logistics control, system with different flow, serial number sequence for storage, the working state of the system, accident, report records, Historical trends can be directly reflected, which is conducive to the analysis and judgment of technical and management personnel.
In addition, our company has also developed an online number automatic identification system, which can meet the process requirements of ERP management at any key point on the production line.

Energy medium

Gas type: clean, dry compressed air or nitrogen (nitrogen is best)
Gas pressure: ≥ 0.5pMA
Gas consumption: maximum 0.5Nm/min
Power source: three-phase 380V; 50Hz
Control power supply: DC 24V
Total power rate: 10KW