Cisco Catalyst WS-C3650-24PS-S is the next generation enterprise-level standalone with stackable option switch with IP Base image. WS-C3650-24PS-S has 24 Gigabit Ethernet POE+ ports with 4 fixed 1G SFP uplink ports and provides fully convergence between wired and wireless capacity on a single platform.
Product Code | WS-C3650-24PS-S |
Enclosure Type | Rack-mountable - 1U |
Feature Set | IP base |
Uplink Interfaces | 4 x 1G SFP |
Ports | 24 x 10/100/1000 Ethernet ports |
Maximum stacking number | 9 |
Stack bandwidth | 88 Gpbs |
Forwarding Bandwidth | 41.66Mpps |
Switching Capacity | 88Gbps |
RAM | 4 G |
Flash Memory | 2G |
Dimensions | 44.5 x 44.5 x 4.4 cm |
Package Weight | 17.49 Kg |
The multigigabit switches support a different set of power supplies than the non-multigigabit switches. In addition the PWR-C1-350WAC is notsupported on the multigigabit switches. In addition to the power supplies listed in Table 3, a 640W DC power supply is available at the time of order or as a spare on all non-multigigabit switch models.
The DC power supply also delivers PoE capabilities for maximum flexibility (refer to Table 1 for available PoE budget with DC power supplies). Customers can mix and match the AC and DC power supplies in the two available power supply slots. Any of these power supplies can be installed in any of the switches.
Model | Number of DC Power Supplies | Total Available PoE Budget |
24-port or 48-port PoE Switch (non-multigigabit) | 1 | 390 W |
2 | 780 W | |
24-port PoE Switch (Multigigabit) | 1 | 160 W |
2 | 600 W | |
48-port PoE Switch (Multigigabit) | 1 | 0 W |
2 | 440 W |
The Cisco Catalyst 3650 Series Switches support both PoE (IEEE 802.3af) and PoE+ (IEEE 802.3at standard), which provide up to 30 W of power per port. PoE removes the need for wall power to each PoE-enabled device and eliminates the cost for additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments.
The 3650 Series can provide a lower TCO for deployments that incorporate Cisco IP phones, Cisco Aironet® wireless LAN (WLAN) access points, or any IEEE 802.3at-compliant end device. Table 5 shows the power supply combinations required for different PoE needs.