0.8mm 1mm 2mm Sheet Glass Making Machine Whole Compelelty Solution


1. Brief Description of 0.8mm 1mm 2mm Sheet Glass Making Machine Whole Compelelty Solution

In the past, the old Grave Bell flat glass was inferior in quality compared with float glass, and there were many fluctuations in vision. This problem has been solved through technological transformation, and the finished flat glass can meet the quality requirements of doors and windows.
Flat glass is produced using the Grave Bell process, which differs from float glass in that its forming process requires a tin bath. But the Grave Bell process does not require a tin bath.
After the batch material is melted in the furnace, the molten glass flows into the working end through the C-shaped brick, and the molten glass passes through the tie rod made of high alumina clay, and sinks into the molten glass at a depth of about 70-150mm to isolate the molten glass from melting. Heat radiation from the zone to the forming zone.

2. Characteristic of Sheet Glass

3. Main Equipment Description

Intermittent device
For batching and mixing raw materials.
Furance
The molten pool is a key component of the glass production line, and the quality of the refractory material is of paramount importance.
Forming
Compared with the float glass process, the flat glass is combined with the grooveless process and the horizontal stretching process, and the glass liquid is formed by the grooveless tank and stretching rotation method.
Annealing furnace
In glass technology, annealing refers to placing glass in an annealing furnace for a certain period of time or slowly reducing the temperature so that no additional permanent or temporary stress is induced. That is to say, annealing also means the process of reducing or eliminating the thermal stress of glass.

4. Scope of Supply

5. Packing and Shipping

JEFFER has rich experiences on experiences of products packing , loading and delivery via various transportations.

7. FAQ
Q: Who we are?
A: JEFFER Engineering and Technology Co., Ltd is a professional engineering company specialising in project design, engineering technology consulting, engineering, procurement, construction (EPC), and project operation management.
Q:Can you offer design service?
A: Yes, we could design full solution drawings as per your requirements.
Q: Can you customize the products?
A: Yes, we have an experienced professional team ready to make design according to the requirement of customers.