Gas Burner, Industrial Combustion System, Furnace Heating Device
1. Brief introduction
The process of reaction is the oxidation reaction between fuel and combustion air, which will be finished instantaneously. The other two processes take a longer time. The fuel process and flame characteristic are determined by the mixing process, which is also determined by the temperature distribution and process requirement of the furnace.
No matter gas combustion or oil combustion, when the fuel goes into the combustion room, the fuel combustion process can be divided into three basic ones:
2. Combustion air system
Regenerator is widely used to preheat the combustion air.
It is high efficiency to recovery the waste heat, the combustion air can be preheated to 1200~1350°C.
Furnace combustion air system is including:
Item | Description |
1 | Regenerator |
2 | Manual valve |
3 | Combustion air blower / Combustion fan |
3. Double deck reversing unit
Double deck reversing unit is including:
3. Preheated air
Item | Description |
Consumption | 890.00Nm3/h |
Thermal efficiency | 71% |
Fume velocity | 0.32Nm/s |
Air velocity | 0.28Nm/s |