water soluble fertilizer mixing equipment Stainless steel mixer Chemical powder paste mixer

Introduction

1. Horizontal mixer is a high-efficiency equipment that is professionally aimed at the homogenization and stirring needs of various particles, powders and tablets;
2. The material of horizontal mixer is divided into carbon steel, 201, SUS304, SUS316L, and the material contact surface is stainless steel.
And the whole machine is made of stainless steel;
3. The mixing capacity model has 50-20000L for customers to choose;
4. The inside of the barrel body is polished and smooth, easy to clean, the blades are stirred without dead angle, and each batch can be mixed evenly within 5-10 minutes;
5. The mixer adopts double "S" shaped blades, and the mixing is fast and uniform;
6. The discharge port has guillotine type, wall type, valve, manual, automatic (pneumatic, electric) waterproof, dustproof and non-leakage;
7. Optional liquid atomizing device: atomize liquid materials of different viscosity to make the mixing of liquid materials more uniform (spraying)

PRODUCTION PROCESS

Ingredients process
Manually pour 4 or more than 4 kinds of raw materials into the designated low-level raw material bin ------ lifted to the high-level batching storage bin by the automatic bucket feeder -----4 kinds of materials are added in sequence according to the equipped amount Proportioning hopper --- After the batching is completed, the discharge door of the proportioning hopper opens and unloads automatically --------The materials in the proportioning hopper enter the mixer and are evenly mixed ----- The mixed materials are mixed The pneumatic discharge door enters the temporary storage silo of mixed materials --- the mixed materials are lifted by the vacuum feeding machine to the material silo to be packaged. If the material bin to be packaged is in a low material level state, the next batching cycle is completed.

Packaging process
Wait for the packaged materials to enter the automatic quantitative packaging scale to complete the set weight weighing (weighing and manual bagging) ---------manually issue the cutting instruction to complete the material filling -----After filling, the material passes through the belt conveyor Transfer to the automatic sewing machine station ------- manual assistance to guide automatic sewing ------ start the next packaging cycle.

materials suggested

Compounding materials: magnesium sulfate, calcium nitrate, potassium nitrate, potassium phosphate, potassium sulfate, potassium chloride, etc. For better use of the equipment, the raw materials used are as fine crystal materials as possible.
Blending capacity: ≥5 tons/hour
Packing capacity: 5kg≥2 tons/hour, 10kg≥3.5 tons/hour
Measurement accuracy: ±0.5%
Power supply: 380V 50Hz
Air consumption: 15m3/min