4 m Width Thick Chain Compost Turning and Mixing Fermentation Machine

The machine is designed reasonably, the motor consumes less power, and the transmission uses a hard-face gear reducer, which has low noise and high efficiency. The key parts are as follows: the chain uses imported parts and is durable. The hydraulic device is used for lifting, and the stacking depth can reach 1.8-3 meters. The vertical lifting height of the material can reach 2 meters. It stays in the air for a long time without aeration. The other three types of stacker fermenters can do with a chain plate type stacker, one is enough.

Features:

Adopt chain drive, rolling support pallet structure, small turning resistance, energy saving and energy saving, suitable for deep groove operation.

The flip pallet is equipped with a flexible tensioning and elastic shock absorption system to protect the transmission system and working parts.

There are 390 detachable wear-resistant curved tooth cutters on the turning and throwing plate, which has strong crushing ability and good oxygenation effect of the pile.

When turning, the material stays on the pallet for a long time, and it is scattered at a high level. It has sufficient contact with the air and it is easy to reduce moisture.

The horizontal and vertical displacement can realize the turning operation at any position in the groove, and the maneuverability is flexible.

The ups and downs of the working parts are controlled by hydraulic system, which is flexible and fast.

It can remotely control the machine's operations of forwarding, traversing, tossing and fast backwards to change the operating environment.

Optional trough type material distributor, automatic discharge device, solar fermentation room and ventilation aeration system, etc.

Equipped with a moving machine for slot change can realize a multi-slot operation of a turning machine, saving investment.

Specifications