Movement series for specialty clocks
Movement available | Size for clock diameters (m) |
materials |
Drive mode |
Suitable for |
For tower building clock with two hands | 0.6m- 10 m | Iron, brass drive gears with worm structure | Stepper motor | Tower building clock/street clock… |
For tower wall clock with three hands | 0.6m- 10 m | Iron, brass inside with worm structure drive gears | Stepper motor | Tower building clock/street clock… |
For floral clock with two hands | 3.5m – 50m | Iron, brass inside with worm structure drive gears | Stepper motor | Floral clocks, flower clock, garden clocks |
For flower clock with three hands | 3.5m – 50m | Iron, brass inside with worm structure drive gears | Stepper motor | Floral clocks, flower clock, garden clocks |
unique features: 1/high torque, lower noise 2/ fully closed- in and compact structure, self-locking ability, oiling needless 3/ Less power waste or abrasion 4/ weatherproof, maintenance-free for all its service life 5/easy for installation and much longer usage life 6/ our own special made lubricating oil 7/the movement can be used under the temperature of very hot and very cold or other bad weather condition, etc……. 8/ there’re movement items for supporting night illumination function on minute/hour hand and marks/numerals. 9/ the movement for three hands clocks over 2m diameters will work with the one motor, the second hand will work in synchronization with the minute/hour hand. 10/ there also movement items which can correct the time by movement itself at the fixed time with a position sensor.
Warm Tips: the working mode of the movement is driven by its matched controller to move, buyers can use either our controller or their owns, we are glad to supply our detailed technical parameters for buyers reference to make their own electronic master controller and matched our movement. |
The unique functions of our master and slave clocks system:
a) Automatic adjustment to the working accuracy
b) Automatic equalize the indication error
c) Automatic show to the working state
d) Automatic correcting time’s going
e) Automatic check-up working failure
f) Automatic alarm the running-time error
g) Automatic conversion the double set control
h) Automatic trace the time and memory time when power breaks
i) Automatic adjustment to the illumination/music chime area
j) Automatic switch AC/DC power
For more information, please contact us directly, we are sure to offer you our best service all the time,
looking forward to working with you, thank you!