Neutral Silicon Sealant Sausage 500ml Weathering Sealant For Solar Pv Modules

Factory Information:

With 20 years of glue-making experience, the factory covers an area of 40,000 square meters, is equipped with highly

mechanized equipment, has a daily output of 30,000 pieces, and more than 200 production and R&D personnel. The source

factory supports OEM/ODM. The products have high cost performance. We look forward to your contact.

Product Features:

Excellent Weather Resistance

Can withstand the tests of extreme climate conditions such as ultraviolet rays, high temperature, low temperature and humidity

when exposed to the outdoor environment for a long time without performance degradation.

High Light Transmittance

Ensure that light can pass through the colloid efficiently, reducing light loss and thereby improving the power generation

efficiency of photovoltaic modules.Enable more sunlight to reach the photovoltaic cells and be converted into electricity.

Good Bonding Performance

Has a strong bonding force with various materials of photovoltaic modules (such as glass, metal, backplane, etc.), ensuring the

stability of the module structure. Prevent delamination or shedding under the influence of external forces such as wind and

snow.

Electrical Insulation

Effectively isolate the current, ensure the electrical safety of the photovoltaic system and prevent problems such as leakage and

short circuit.

Corrosion Resistance

Resist the erosion of pollutants, acid and alkali substances in the atmosphere and extend the service life of photovoltaic modules.

Anti-Aging Performance:

Not prone to aging or yellowing during long-term use and maintain stable performance.

High and Low Temperature Resistance

Can still maintain good physical and chemical properties in extremely cold and high-temperature environments.

Application Scenarios

Photovoltaic module packaging, junction box sealing, frame bonding, bracket bonding and fixation, etc.

Usage Method:

• Preparation Work:
• 
  Ensure the construction surface is clean, dry, free of dust, grease and moisture. You can use cleaners and rags for
• cleaning. Install the glass glue gun in advance.

• Gluing Steps:
• 
  Use a utility knife or scissors to cut the mouth of the glass glue bottle. Pay attention to the appropriate size of the
• incision to ensure smooth glue output.
• Load the glass glue bottle into the glue gun and ensure a firm installation.
• 
  Hold the glue gun, align the glue nozzle with the construction area, and press the trigger of the glue gun at a uniform
• speed to extrude the glass glue evenly.
• Construction Skills:
• 
  Keep the glue nozzle at a 45-degree angle to the construction surface when gluing, so that the glue can be
• distributed more evenly on the construction surface.
• 
  For longer construction joints, you can apply glue in sections. After each section, use your fingers or tools to
• compact and smooth the glue.

• Post-treatment:
• 
  After gluing, promptly clean the excess glass glue with a damp cloth or scraper to avoid difficulty in cleaning after
• solidification.

Contact

Factory Pictures

FAQ

Q1: Wonder if you accept small orders?

A1: Yes, we accept small trial orders. Besides, trial order's product quality is the same to massive production.

Q2: Can you send samples to test?

A2: Sure, sample is welcomed, while the sample's fare and freight at your cost.

Q3: Can you do OEM/ODM for me?

A3: Yes, both is available, besides, we have design department, if you have problems, we can help solve them.

Q4: How can I place the order?

A4: Firstly, confirm PI and pay deposit,then we will arrange sample and massive production. After finished production, plz pay

the balance before shippment. Then delivery the goods.