OEM Grey waterproof epoxy resin anchoring adhesive for plant rebars 360ML

Usage Scenarios:

Building reinforcement - Reinforcing the beams, columns, slabs and other structures of old buildings to increase their bearing capacity.

New construction projects - Embedding rebar for constructing new concrete structures, and fixing stair handrails and balcony railings.

Bridge engineering - Strengthening the piers, beams and other parts of bridges.

Tunnel engineering - Fixing anchor bolts and steel mesh in tunnels.

Equipment foundation installation - Providing a solid foundation for the installation of large equipment.

Rail transit - Fixing track sleepers.

Water conservancy projects - Reinforcing water dams, embankments and other water conservancy facilities.

Billboard installation - Fixing the support structure of large outdoor billboards.

Product Features:

• Room-temperature curing, high strength. It has a relatively high bonding strength, capable of providing reliable

• anchoring force, tightly combining the rebar with the base material as if it were pre-embedded.

• Strong adhesion: It has good adhesion performance to materials such as rebar and concrete.

• Good durability: It has excellent anti-aging, acid and alkali resistance, water resistance and other properties, and

• can maintain stable performance for a long time under various environmental conditions.

• Low shrinkage during hardening: It can reduce problems such as hollowing or cracks caused by colloid shrinkage.

• Excellent toughness and impact resistance: After curing, it has good toughness and can withstand certain impacts and vibrations.

• Wide glue-mixing ratio: The glue-mixing ratio of components A and B is wide, facilitating on-site operation and adjustment.

• Good temperature resistance: Some rebar-planting adhesives have good heat resistance and can be welded after rebar embedding.

Usage Method:

• Drilling - Drill holes at the positions where rebar is to be implanted according to the design requirements using an
• electric drill.

• Hole cleaning - Use a brush or blower to remove dust and debris from the holes, then wipe the hole walls with
• or alcohol to ensure the holes are clean and dry.

• Rebar treatment - Use a wire brush to remove rust and oil stains from the rebar surface, and wipe it clean with
• or alcohol.

• Glue-mixing - Mix the glue liquids of components A and B in accordance with the proportion specified in the rebar-
• planting glue product manual, and stir evenly.

• Glue injection - Inject the well-stirred rebar-planting glue into the holes using a glue injector or syringe. Generally,
• the glue injection volume should reach about 2/3 of the hole depth.

• Implant rebar - Insert the treated rebar quickly into the hole, rotate the rebar in a certain direction to evenly distribute
• the glue liquid and expel the air from the hole.

• Curing and maintenance - According to the curing time of the rebar-planting glue, avoid disturbing the rebar during
• the curing period. Under normal temperature, it usually takes several hours to several days to fully cure.

Contact:

Factory Information:

With 20 years of experience in adhesive production, the factory covers an area of 40,000 square meters, equipped with highly

mechanized facilities. The daily output reaches 30,000 pieces, and there are over 200 production and R&D personnel. We are

an original factory supporting OEM/ODM. Our products are cost-effective. Looking forward to your contact.

Factory Pictures