Epoxy Adhesive Structural Reinforcement Injection Mortar Resin Injection Anchor

Factory Information:

With 20 years of experience in adhesive production, the factory covers an area of 40,000 square meters, equipped with highly

mechanized facilities. The daily output reaches 30,000 pieces, and there are over 200 production and R&D personnel. We are

an original factory supporting OEM/ODM. Our products are cost-effective. Looking forward to your contact.

Product introduction

This two-component epoxy-based reinforcement adhesive, often referred to as a chemical anchor, is essential for structural

reinforcement and anchoring in construction. Designed to provide robust bonding strength, it ensures durable and secure

attachments for building, renovation, and infrastructure projects. The adhesive combats the effects of environmental and

chemical corrosion, resists aging, and maintains high pull-out strength, making it reliable for both vertical and horizontal

installations. It is widely trusted by professionals for enhancing safety and structural integrity in a variety of construction

scenarios.

Key Features:

1. Acid and alkali resistance.

2. Resilient against corrosive damage.

3. Anti-aging capabilities.

4. High pull-out strength.

Usage Method:

• Drilling - Drill holes at the positions where rebar is to be implanted according to the design requirements using an
• electric drill.

• Hole cleaning - Use a brush or blower to remove dust and debris from the holes, then wipe the hole walls with
• or alcohol to ensure the holes are clean and dry.

• Rebar treatment - Use a wire brush to remove rust and oil stains from the rebar surface, and wipe it clean with
• or alcohol.

• Glue-mixing - Mix the glue liquids of components A and B in accordance with the proportion specified in the rebar-
• planting glue product manual, and stir evenly.

• Glue injection - Inject the well-stirred rebar-planting glue into the holes using a glue injector or syringe. Generally,
• the glue injection volume should reach about 2/3 of the hole depth.

• Implant rebar - Insert the treated rebar quickly into the hole, rotate the rebar in a certain direction to evenly distribute
• the glue liquid and expel the air from the hole.

• Curing and maintenance - According to the curing time of the rebar-planting glue, avoid disturbing the rebar during
• the curing period. Under normal temperature, it usually takes several hours to several days to fully cure.

FAQ

Factory Pictures

Contact: