OEM Epoxy Marble AB Glue Dry Hanging AB Adhesive For Marble Stone Tile

Usage Scenarios:

• Stone Dry Hanging - Used to fix stone slabs such as marble and granite on the facade of buildings.

• Installation of Ceramic Thin Plates - Install large ceramic thin plates as wall or floor decoration.

• Curtain Wall Project - Plays an important role in the installation of glass curtain walls, metal curtain walls, etc.

The epoxy resin dry-hanging structural adhesive series products are modified epoxy resin polymers. It has excellent and high-

quality anti-aging performance and strong toughness.

1. Surface treatment before construction:

The surface of the bonded substrate must be kept clean, dry and free of dirt. The metal surface should be rust removal. If the

stone or metal surface is too smooth, the smooth surface should be polished appropriately.

2. Mixing process:

Step one:

Use a putty knife to take out the same amount of dry hanging glue of A and B components respectively Mix A and B glues in a

ratio of 1:1 Mix well and stir until completely uniform

Step two: Use a suitable tool to apply the mixed glue to the surface of the material to be pasted.

Fix the bonded materials together and appropriately squeeze them to ensure that the adhesive and the pasted materials are in

complete contact.

It is recommended to use it up within 30 to 45 minutes after thoroughly mixing Part A and Part B. The initial curing time after

mixing is 1 to 2 hours, and it is fully cured within 24 hours, and the initial curing time cannot be loaded with heavy loads

Factory Information:

With 20 years of glue-making experience, the factory covers an area of 40,000 square meters, is equipped with highly

mechanized equipment, has a daily output of 30,000 pieces, and more than 200 production and R&D personnel. The source

factory supports OEM/ODM. The products have high cost performance. We look forward to your contact.

Contact

Factory Pictures