Paste Form Electronic Adhesive Silicone Sealant Excellent Heat Resistance

Sealant Factory Information:

With 20 years of experience in glue production, the factory covers an area of 40,000 square meters

equipped with highly mechanized equipment. The daily output is 30,000 pieces and there are more than 200 production and

R & D personnel. The source factory supports OEM/ODM. The products are cost-effective. We look forward to your consult.

Usage

1. Surface Cleaning Clean the surface of the object to be bonded or coated thoroughly, and remove rust, dust, oil stains, etc.

2. Application Unscrew (or cut open) the cap of the adhesive tube. Squeeze the adhesive onto the cleaned surface, distribute it

evenly, and then bring the surfaces to be bonded together and fix them.

3. Curing Place the bonded or sealed components in the air to allow them to cure naturally. The curing process starts from the

surface and progresses inward. Within 24 hours (at room temperature and 55% relative humidity), the adhesive will cure to a

depth of 2 - 4 mm. If the application location is deep, especially in areas that are not easily exposed to air, the complete curing

time will be extended. If the temperature is low, the curing time will also be prolonged. A 6 - mm - thick sealant takes more than

7 days to cure completely.

4. After Operation Immediately tighten the cap of any remaining adhesive and store it in a sealed condition. When using it again,

if there is a small amount of skinning at the opening, remove it, and it will not affect normal use. During storage, a small amount

of curing may also occur at the tube opening. After removing it, normal use can be resumed without affecting the product's

performance.

Application

Features:

1. Heatproof:Resists high temperatures, maintaining integrity and adhesion in heat - generating electronics.

2. Strong - Bonding:Adheres well to metals, plastics and ceramics, ensuring long - term stability.

3. Easy - to - Apply:Paste form enables accurate application in tight spaces.

4. Moisture - Resistant:Prevents moisture - related short - circuits and corrosion.

5. Well - Sealing:Creates an airtight and waterproof seal against dust and contaminants.

6. Compatible:Chemically suits most electronic materials, avoiding reaction risks.

Factory pictures

FAQ

Q1. When can I receive my products?

A1: Sample order need 1 - 3 days.

Mass production need 7- 10 workdays.

Q2. Can you send me samples for reference?

A2: Yes, we are glad to send you free samples.

Q3. Can you provide OEM service?

A3: Yes, and we can custom the volume and tube package.

Q4: Where is your factory? Can I visit it?

A4:Our factory locate in Guangdong Province, welcome to visit us anytime!

Q5: What is the payment term that you can provide?

A5: Sample 100% payment.

30% TT prepayment and 70% balance payment for mass order.