MachineU > China Products > Consumer Electronic > Computer Hardware & Software > Routers
Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME
Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME
Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME
Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME
Specifications
Model Number :
CS-100ME
Place of Origin :
Shenzhen, China
MOQ :
1000pcs
Payment Terms :
T/T, L/C
Delivery Time :
20-25 work days
Packaging Details :
Stanard Carton
Model :
WIFI Mesh Router
Protocol :
IEEE802.11n/802.11g/802.11b/802.11ac/802.3/802.3u/802.11v/r
WLAN rate :
Up to 1167Mbps
Material :
Plastic
Color :
White
Warranty :
1 Year
Antenna :
2*3dBi Dual-band omnidirectional built-in antenna
Description

Dual-band omnidirectional built-in antenna 2.4G/5G WIFI Mesh Router CS-100ME

1.Summary

MESH routing system CS-100ME is a dual-band home wireless networking suite product. Each node has a 10/100Mbps WAN/LAN adaptive port, a 10/100Mbps adaptive LAN port and a wireless transmission rate of 1167 Mbps.

2.Product Specification

2.1 Basic configuration

The device name Mesh Wi-Fi
The device type Mesh Wi-Fi (Table-Top)
The device model CS-100ME
WAN 110/100Mbps WAN/LAN adaptive port
LAN 110/100Mbps WAN/LAN adaptive port
WLAN 2.4G 300Mbps,5G 867Mbps
Hardware Indicators The main chip RTL8197FNT-VE4-CG
Clock Speed 600MHz
Flash Storage 8MByte or Higher SOP8
Ram Capacity 64MByte or Higher
Power Specification 9V1A
Light A Comprehensive Light (Red or yellow or green)
Reset Reset
Aerials 2*3dBi Dual-band omnidirectional built-in antenna

Wireless transmission rate

 1167Mbps
Wireless Standards 802.11b/g/n 2.4GHz; 802.11ac/a/n 5GHz;
Transfer Standards 802.3;802.3u;
MESHNetworking standards 802.11s;

Roaming Standard

 802.11v/r;

2.2 Interface requirements

Category Requirement Standard

Wired Interface

 WAN ports 1*10/100Base-T ports,It meets the IEEE802.3/802.3u standard supports full-duplex/half-duplex flow control.
LAN ports 1*10/100Base-T ports,It meets the IEEE802.3/802.3u standard and supports full-duplex/half-duplex flow control.
Power Interface

One power interface, router uses external power adapter to supply power. The external power adapter shall:

1. Meet the EMC requirements of YD/T 983 and pass CCC certification;

2. Input voltage: 198V-242V-50Hz;

3. Output voltage DC: 9V + 5%, ripple range + 100mV, output current: 1A;

4. The MTBF time of power supply is more than 30000 hours.

5. The power interface of the equipment itself and the DC output interface of the power adapter should be a unified international standard circular interface with a diameter of 2.1 mm.

6. The DC output power supply line of the adapter can be equipped with EMI absorption magnetic ring.

7. Under normal conditions, the insulation resistance between the metal housing of the equipment and the power cord shall not be less than 50M.

8. There should be lightning protection and surge protection tests. The lightning protection level should be at least 1.5KV.
Wireless Interface Wi-Fi Wireless Network

It meets the standard of 802.11protocol,supports802.11b/g/n/a/ac,supports 2.4 GHz and 5 GHz,and has a wireless rate of 1167 Mbps.

Two built-in 3dBi omnidirectional dual-band antennas;

Up to 32 wireless devices are allowed.

2.3 Key and indicator

Functional description
System reset Press the RST button for 6 seconds, release the indicator after flash, turn the indicator into long light and restart the system, and finally return the flashing indication to restore the factory settings successfully.
Indicator light

Green Long Bright: Good Connection Quality

Yellow Long Bright: General Connection Quality

Red Long Bright: Connection Failure

3.Basic requirements

3.1 Hardware requirements

LAN upstream devices should ensure the stability and reliability of hardware structure, antenna connection, etc. RAM is not less than 64 MByte, Flash is not less than 8 MByte.

Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100MEPlastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME

Product tags

4g modem antenna external

,

4g modem external antenna

,

slt 4g external antenna
Send your message to this supplier
Send Now

Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME

Ask Latest Price
Product Detail
Model Number :
CS-100ME
Place of Origin :
Shenzhen, China
MOQ :
1000pcs
Payment Terms :
T/T, L/C
Delivery Time :
20-25 work days
Packaging Details :
Stanard Carton
Contact Supplier
Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME
Plastic Dual Band Wifi Router Omnidirectional Built In Antenna 2.4G/5G CS-100ME

Cabsat industrial limited

Active Member
7 Years
guangdong, shenzhen
Since 2004
Business Type :
Manufacturer
Main Products :
GPON ONT, Docsis Cable Modem, GPON OLT
Total Annual :
200-250 Million
Employee Number :
2000~5000
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products CPE WiFi Router
MachineU China Products Consumer Electronic Computer Hardware & Software Routers
Contact Supplier
Submit Requirement