Cisco Compatible 1Gbps 1000BASE-T SFP Transceiver Module Copper 100m Industrial RJ-45

Description

The GIGAOPTO's GTS-T0012-10I-A transceiver is a high performance, cost-effective Copper Small Form Pluggable (SFP) module compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE802.3ab, which supports 1000Mbps data-rate up to 100 meters reach over unshielded twisted-pair category 5 cables. Its electrical interface is MSA compliant 20-pin edge type connector and the line-side interface is RJ45 connector. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with the address of A0h via the 2 wire serial CMOS EEPROM protocol.

Featuring low power consumption (1.05W for 100m), the hot swappable 1000Mbps SFP transceiver is compatible with various brands of hosts, widely used in data centers and enterprise networks.

Specification

Features

• Support 1000BASE-T operation in Host Systems
• For 100m Reach Over UTP Cat 5/5e/6 Cable
• Fully metallic enclosure for low EMI
• Low power dissipation (1.05W typical)
• Compact RJ-45 connector assembly
• Access to physical layer IC via 2-wire serial bus
• Hot-Pluggable SFP Footprint
• Detailed product information in EEPROM
• Single 3.3V power supply voltage
• Operating case temperature: Industrial: -40°C~85°C (-40 to 185°F)
• Compliant with INF-8074i, SFF-8472
• Compliant with IEEE 802.3ab 1000BASE-T
• Compliant with RoHS6

Application

• LAN 1000Base-T
• Gigabit Ethernet over Cat 5/5e/6Cable
• Switch to Switch Interface
• Router/Server Interface

Compatibility

Each Gigaopto’s optical transceiver is tested in the host device to verify interoperability, and we promise 100% full compatibility on the specified device with a 3-year warranty.
For this (1000BASE-T Copper SFP 100m Industrial), please refer to the P/N correspondence table. If you are interested in knowing more compatibility, you are always welcome to contact us.

Ordering Information