GEPON OLT PX20++ PX30 SFP 1.25G TX1490nm/RX1310nm 20km SC SMF DDM Optical Transceiver Module

Description

The GIGAOPTO's GTS-SET11-20DCC SFP module supports data rate of typical 1.25Gbps for GEPON OLT application up to 20km transmission distance. It is designed for low-cost point to multipoint (P2MP) Fiber to the Home, Business or Curb (FTTX) systems. The device is based on the IEEE 802.3ah specification for bi-directional communications over a single fibre. The EPON OLT transceiver is packaged of small form factor pluggable with SC/UPC connector. The digital diagnostic monitoring function is fully compliant with SFP MSA.

Specification

Features

• Compatible IEEE 802.3ah 1000BASE-PX20++ GEPON application
• Single fiber transceiver with single mode SC/UPC receptacle
• 1.25Gbps, 1490nm continuous mode DFB Transmitter
• 1.25Gbps, 1310nm burst mode APD-TIA Receiver
• Burst mode received signal strength indication (RSSI) output
• Single 3.3V power supply
• LVPECL compatible data input/output interface
• LVTTL transmitter disable control
• LVTTL transmitter laser fault alarm
• Low EMI and excellent ESD protection
• Digital Diagnostic Interface Compliant with SFF-8472
• International Class 1 laser safety compliant
• Case operating temperature range:
• Commercial: -5°C~70°C; Industrial: -40°C~85°C

Application

• EPON 20km OLT Side
• Access Networks
• FTTx

Standards

• Complies with SFP Multi-Source Agreement (MSA) SFF-8074i
• Complies with IEEE 802.3ah
• Complies with FCC 47 CFR Part 15, Class B
• Complies with FDA 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Complies with SFF-8472
• Compatible with TR-NWT-000870 4.1 ESD sensitivity classification Class 2.
• Compatible with Telcordia GR-468-CORE

Ordering Information

Compatibility

As a global provider of Brand Compatible Networking products, we Gigaopto have made significant investments over the past few years to support our customers, as well as in our physical infrastructure and test equipment platforms. Our overall trusted engineering and testing capabilities allow us to produce a large selection of Brand Compatible Transceivers. This (EPON OLT PX20++ PX30 SFP 1.25G TX1490nm/RX1310nm) is 100% compatible with mainstream optical devices. Below is a table of P/N correspondence for different brand modules. For more information, please don't hesitate to contact us.

Pin Definition

Typical Application Circuit

Package Outline

Dimensions are in millimeters. All dimensions are ±0.2mm unless otherwise specified. (Unit: mm)