3Gb/s 1310nm 10km DOM LC SMF Single Transmitter Video Pathological Patterns Transceiver Module MSA Pinout

Functional Specification

Description

Gigaopto’s GTS-L1330-40DCT 3G SDI Single Transmitter Module is a dual channel optical single mode transmitter module designed to transmit optical serial digital signals as defined in SMPTE 297-2006.

It supports from 50Mbps to 3Gbps and is specifically designed for transmitted the SMPTE 259M, SMPTE 344M, SMPTE 292M and SMPTE 424M SDI pathological patterns.

This transmitter consists of two sections: a DFB laser transmitter and MCU control unit. All modules satisfy class I laser safety requirements,it can transmit signal from 50Mbps to 3Gbps transmission reach up to 40km with 3Gbps pathological signals.

It is with the SFP 20-pin connector to allow hot plug capability, full compliant with SFP MSA, SFF-8472 standards. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters.

It is suitable for high-definition digital broadcasting applications.

Features

• Supports video pathological patterns for SD-SDI, HD-SDI and 3G-SDI
• SMPTE 297-2006 Compatible
• Robust error free transmission of signals from 50Mb/s to 3Gb/s & up to 40km single-mode fiber
• 1310nm DFB laser
• Metal enclosure for Lower EMI
• Compliant with SFP MSA and SFF-8472
• Digital Diagnostic Monitoring
• Compatible with RoHS
• +3.3V single power supply
• Operating case temperature: Standard: 0 to +70°C

Application

• 3G-SDI/HD-SDI/SD-SDI Electrical-Optical Converter
• 3G-SDI/HD-SDI/SD-SDI Optical-Electrical Converter
• Remote digital display or security surveillance systems
• Professional video broadcast
• Digital cinema system

PIN Definition

HD-SDI SD-SDI 3G-SDI SFP Video TX1310nm 40KM Transmitter Only

Note: Society of Motion Picture and Television Engineers short for SMPTE has standards for handling high definition video signals with pathological pattern. SMPTE's standards currently call for 259M (SD-SDI), 344M (ED-SDI), 292M (HD-SDI) and 424M (3G-SDI).

SMPTE 297-2006: This standard defines the fiber optic interface for the transmission and reception of SDI signals at various data rates: 3G ~ 12G

SMPTE 259M: 143 through 360 Mb/s

SMPTE 344M: 540 Mb/s

SMPTE 292: 1.485 and 1.485/1.001 Gb/s

SMPTE 424M: 2.97 and 2.97/1.001 Gb/s

These bit-rates are sufficient for 1080p video at 50 or 60 frames per second.