Chipset RTL8676S+RTL8271B+RTL8192ERE

DDR/SDR SDRAM 8/16/32/64 MB DDR/SDR (inside the RTL8676S)

Serial Flash 8 MB

Protocols

 RFC 2684 Multiprotocol Encapsulation over ATM Adaptation Layer 5

 RFC1483 Multiprotocol Encapsulation over ATM Adaptation Layer 5

 RFC2516 PPP over Ethernet (PPPoE)

 RFC1662 PPP in HDLC-like Framing

 RFC1332 PPP Internet Protocol Control Protocol

 RFC894 A Standard for the transmission of IP Datagrams over Ethernet Networks

 RFC1042 A Standard for the transmission of IP Datagrams over IEEE 802 Networks

 MER (IP over Ethernet over AAL5)

 PPTP, L2TP, IPSec, and SIP application layer gateway (ALG)

 Self-learning bridge (IEEE 802.1D Transparent Bridging)

 Support at least 64 learning MAC addresses

 RFC768 User Datagram Protocol (UDP)

 RFC791 Internet Protocol (IP)

 RFC792 Internet Control Message Protocol (ICMP)

 RFC793 Transmission Control Protocol (TCP)

 RFC826 An Ethernet Address Resolution Protocol (ARP)

 RFC862 Echo Protocol

 G.992.1 (T1.413)

 G.992.2 (G.dmt), G.lite

 G.992.3 (G.bis/ADS L2)

 G.992.5 (ADSL2+)

 Annex L (reach extended ADSL2)

 ATM forum UNI3.0, 3.1 and 4.0 permanent virtual circuits (PVCs)

 CBR, UBR, VBR-rt and VBR-nrt

 ITU-T i.610F4/F5 OAM

 IP routing

Wireless Features

Standard

IEEE802.11b/g/n

Modulation schemes

 802.11g: 64QAM, 16QAM, QPSK, BPSK,DSSS

 802.11b: CCK, DQPSK, DBPSK

 HT20 and HT40: 64 QAM, 16QAM, QPSK,BPSK

Modulation schemes

 802.11g: 64QAM, 16QAM, QPSK, BPSK,DSSS

 802.11b: CCK, DQPSK, DBPSK

 HT20 and HT40: 64 QAM, 16QAM,QPSK, BPSK

Wireless data rate

 802.11b: 11, 5.5, 2, 1 Mbps per channel,auto fallback for extended range

 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps per channel, auto fallback for extended range

 HT20: up to 150 Mbps

 HT40: up to 300 Mbps

Operating channels

 802.11b:

– 4: France

– 11: USA and Canada

– 13: Most European countries

– 14: Japan

 802.11g:

– 11: USA and Canada

– 13: Most European countries

– 14: Japan

 HT20:

– 11: USA and Canada

– 13: Most European countries

– 14: Japan

 HT40:

– 3—9: USA and Canada

– 3—9: Most European countries

Transmission distance

 100m indoors coverage area

 300m outdoors coverage area (varying depending on the actual environment)

Security

64-bit, 128-bit WEP, AES, TKIP, WPA,WPA2, 802.1x

Basic Features

 Set IP address and subnet mask at the LAN end and manage domain Name

 VLAN and port binding at the LAN end

 Multi-IP address management at the LAN end

 DHCP server, Option 60/15/42/50/250, and management of multiple address pools

 DHCP Relay, compatible with RFC2131, RFC951, RFC1542

 10M/100M, self-adaptation, half duplex and full duplex management of the LAN port

 Up to eight WAN connections

 Static uplink, configuring of static IP address, subnet mask, DNS, and gateway

 PPPoE uplink, configuring of user name, password, MRU, PAP and CHAP authentication, disconnection upon idle overtime

 DHCP uplink, obtaining the IP address through DHCP

 Bridge uplink

 VLAN at the WAN end and 802.1q VLAN

 NAT and NAPT

Advanced Features

 ALG: TFTP/FTP/PPTP/RTSP/L2TP/H323

 MAC address filtering in the whitelist mode

 Virtual server (NAPT configuration page), meeting the TR098 requirements for port mapping nodes, supporting 16 entries of virtual server configuration

 DNS agent

 Manual configuration of DNS

 QoS:

– Interface management, supporting strict-priority (SP) and DWRR scheduling modes

– Queue management, supporting eight priority queues

– Flow classification management

 Anti-DoS, independent switch for each protection item, and anti-portscanning switch

 IP filtering, security level configuration, blacklist and whitelist based on WAN/LAN end (each list supporting up to 20 entries of IP filtering configuration)

 Ping/Web/Telnet/SSH/FTP/TFTP local access control

 Ping/Web/Telnet/SSH/FTP/TFTP remote access control

 UPnP

 IGMP Snooping and IGMP data control of the port

 IGMP relay

 Static routing management, supporting up to 16 entries of static routing configuration

 Dynamic routing management, RIPV1, RIPV2, active and passive Modes

 SNTP

 URL filtering, blacklist and whitelist filtering, supporting up to 20 URL entries

 DMZ

Status Enquiry

 System information

 ADSL information

 Host list at the LAN end

 WAN connection status and statistics information

 LAN statistics information

Configuration Management

 Web, TR069 and SNMP configuration management

 Telnet and SSH

 Restore to the factory defaults and keep key parameters, reboot the router

 Two-level user management, including administrator and user

 Ping diagnostics

 Software version upgrade, double Image backup, and HTTP upgrade

 Upgrade and download of the configuration file of HTTP and TFTP server

 Record log, upload log through TFTP, clear log, and download log through HTTP

External Connectors

 1 x RJ11 DSL interface

 1 x WPS/WLAN button

 1 x reset button

 4 x RJ45 Ethernet interfaces

 1 x USB host 2.0 interface

 1 x power interface

 1 x power switch

Ethernet Interface Features

 Fully compliant with IEEE802.3/802.3u standards

 10Base-T and 100Base-TX

 Half duplex and full duplex

 Auto MDI/MDIX

 Flow control

Consumption

7W

Operating Temperature 0ºC—40ºC

Storage Temperature -20ºC—70ºC

Operating Humidity 10%—95%, non-condensing

Storage Humidity 5%—95%, non-condensing

Power Supply 12 V DC, 1 A

 Regulation Compliance

 FCC

 CE

Safety Regulations UL

Green Standard RoHS