IOT Device WA-209D Support UART And Wheel Rotation Detection And OTA
WA-209D is a IOT for the e-bike&scooter sharing. The terminal is equipped with GSM network remote control, GPS real-time positioning, Bluetooth communication, vibration detection, anti-theft alarm and other functions.Through GSM and Bluetooth, the IOT interacts with the background and mobile APP respectively to complete the e-bike&scooter control and upload the real-time status of the e-bike&scooter to the server.
Parameters:
Size | (104.5±0.15)mm × (77.76±0.15)mm × (20.7±0.15)mm |
Working Voltage | DC12V-72V |
Backup battery | 550mAh |
Waterproof | IP67 |
Material | PC+ABS |
Working Temp | -20 ℃ ~ +65 ℃ |
Humidity | 20 ~ 95% |
SIMCARD | Micro-SIM |
Network Frequency:
Frequency | GSM 850/900/1800/1900MHz |
Maximum Power | 1W |
LBS | Support, positioning accuracy of 200 meters (related to base station density) |
GPS:
Tracking sensitivity | < -162dBm |
Start time | Cold start:35S, Hot start: 2S |
Positioning accuracy | 10 meters |
Speed accuracy | 0.3m/s |
AGPS | Support |
Bluetooth:
BLE version | BLE4.1 |
Sensitivity | -90dBm |
Maximum receiving distance | 30m, Open area |
Inside E-bike | 10-20 meters, depending on the installation environment |
Installation:
The device is connected to the corresponding port of the controller according to the model of the wiring port. When the e-bike battery power on, the device will automatically turn on once the controller is connected. After installation, check whether the status of the three indicators on the side of the device is normal. Under normal circumstances, the three lights are always on when installed outdoors; when installed indoors, except the GPS signal lights are blinking, the other two lights are always on.