3G WCDMA Fleet GPS Tracking Systems Movement And Over Speed Alert With Sirf 3 GPS Module

1. Main Functions

A. Real Time Tracking

B. Triggering Emergency Alarm

C. Remote Cut Off Engine

D. Remote Monitoring Voice

E. Auto Track

F. Mileage statistics

G. Ignition Status Display

H. Support Fuel Temperature Sensor (Optional)

I. SOS Alert And Overspeed Alert

2. Specification

3. Setup

1. Set administrator
Send SMS “setadmin123456” to the device, it will make you as administrator number. Delete the administrator number from the administrator cell phone, it will be back to no administrator.

2. Add the number

If there is an administrator, only the administrator can add number to the tracker . Send SMS “admin123456 13612345678”. "admin" as instruction, "123456" as password, "13612345678" as added number.

3. Delete the number

If there is an administrator, the administrator can delete number to the tracker . Send SMS “noadmin123456 13612345678”. "noadmin" as instruction, "123456" as password, "13612345678" as deleted number.

If the administrator deletes his own number, the tracker is back to the no administrator, and the record numbers deleted automatically.

4. Change the Password
Send SMS: “password + old password + space + new password” to change the password. For example: Send SMS “Password123456 168168”. "password" as instructions, "123456"as old password, "168168" as new password. Password must be six digits. Tracker’s initial password is 123456. If there is no administrator number, all number can change the password. If there is already an administrator number, only the authorized number can change the password.

5. Control Oil
Send SMS “stopoil+password” to control oil.

For example send SMS: stopoil123456
"stopoil" as instructions, "123456"as password.
To supply the oil again, send SMS “supplyoil+password” to the device.
For example, send SMS “Supplyoil123456” to the tracker. "Supplyoil" as instruction, "123456" as the password.

4. Main Functions Commands

A. Geo-Fence

Set up a geo-fence for the unit to restrict its movements within a district. The unit will send the message to the authorized numbers when it breaches the district.

Set up: The user can Send SMS “stockade + password + space + MinLatitude, MinLongitude; MaxLatitude, MaxLongitude” to unit to set the restricted district. In case of breach, it will send SMS “stockade! + geo-info” to the authorized numbers.

For example send SMS “stockade123456 22.548123, 114.081234; 22.549123, 114.082234” to the unit.

Remark: The first latitude & longitude is coordinate of min of the Geo-fence, while the second latitude & longitude is the coordinate of the max. It will alarm one time in each setting.

Cancel: Send SMS “nostockade + password” to deactivate this function.

This function will be out of effect after the unit moves outside the district.

B. Auto Track

Report a Geo-info at 30 seconds intervals to the online position platform for 5 times: Send SMS “at30sum5” to the device. The max intervals is 65535 seconds. You can send “at30sum0” for heaps of times to platform.

Send“noat123456” to the tracker, the tracker will stop transmitting the data to the platform.

If the platform support this function, it can be operated on the platform straightly.

C. Set APN

In order to send GPS data to IP address, you still must set mobile network Access Point Name (APN). If you don’t know the APN, you can consult local network service supplier. The format of set APN is “apn + password +space + APN”. For example you send SMS “apn123456 cmnet” to the device. The device will reply SMS “Set APN ok.”

5. Picture