Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking

1. Speed limiter Endurance Tests

Endurance tests on speed limiter device should be carried out as per the following procedure and conditions specified. The device shall work satisfactorily during the tests and shall meet the performance requirements as given in 8.3. after the test.However, if any breaking down of the device occurs during one of the endurance tests, a second device can be submitted to the considered endurance tests at the manufacturer's request. The speed limiter device should be mounted on a test bench simulating the attitude and movement to simulate the vehicle conditions.
Note - For speed limiting function as inbuilt feature in the engine ECU shall be submitted to the endurance test prescribed below. However, this may be omitted if the applicant demonstrates resistance to those effects.Here "demonstration" means - Declaration by manufacturer in a format (Annex A) or Submission of relevant test reports.

2.Performance Tests on the Device as Fitted on the Vehicle

• speed limiter device as installed on specified vehicle type can be approved as per choice of supplier by either of the following methods
• The general requirements mentioned in clause 4 pertaining as fitted on the vehicle should be examined during the test

3 Product Specifications

3. Speed Limiter Requirements

Ethiopia Level Car Speed Limiter Support Bluetooth Print Function and GPRS Tracking

1. The speed limiting device shall be so designed, constructed and assembled so as to resist vibrations, corrosion, dust, humidity, petrochemicals and aging phenomena to which it may be exposed;
2. When the vehicle, running at its set speed and with the driver's accelerator at its position of maximum travel, is subject to an accelerating force due to a down gradient,the limiter shall control speed by restricting the engine power to the limiter's minimum
   engine power control setting;
3. The road speed limiting device shall be designed and constructed in such a way that it can be fitted in a place not easily accessible
4. The actuation force of the controls should not have a detrimental effect on the driver's efficiency or impose fatigue on the driver;
5. Speed limiter device shall have geo-fence management feature;
6. Speed limiter device shall remotely communicate through telecom infrastructure

6 Set Speed Limiter GPRS user name and password

Some country must be set GPRS user name and password for GPRS communication. The format of set GPRS user name and password is “user + space + GPRS user name + space + GPRS password”. For example, “user name 123456”, “user” is command, “name” is GPRS user name,“123456” is GPRS password. After send SMS, tracker will reply “Set GPRS User and Password ok . ” .