10 TPH Paddy Dryer Continous Paddy Dryer Manufacturer 200 Tons Rice Dryer Tower

Features

· Constantly, stable, easy operating, small footprint.

· Suitable to various grains.

· Heat recycling, lower cost of energy.

· Grain drying complete, evenness, dry grains can storage directly.

· Quality after drying is pretty good, no pollution.

1. Introduction

The mixed flow grain dryer consists of drying sections,tempering section and cooling section ertc.Many layersof air ducts are arranged in an alternate way to form a mixed air flow blowing through the grain to remove the moisture.Suitable for drying coarse grains-corn,sorghum;cereal grains-rice,wheat; small grain-rapeseed,millet and oilseeds-soybeans.

2. Scope of application

Paddy/Maize

3. Working principle
The first important part of corn dryers is the hot-blast furnace. The following types like: coal burning furnace, fuel burning furnace, natural gas burning furnace, and bio-fuel burning furnace will be available for users. The main function of the furnace is to provide dryer with hot air as the drying medium.
The most important part of the corn dryer is the drying machine. Its internal components are mainly composed of air intakes and angular boxes.
In the whole process, raw grain will first fill the drying container, then the hot-blast generated by the furnace will go through the air intakes and enter the inside of the machine. Corn flows slowly from top to bottom by gravity. Meanwhile the hot air flow through the corns layer by layer. In this process, heat is transferred from hot air to grain material to raise the grain temperature to make the moisture inside the material evaporate into the air and become exhausted air, then discharged into the air through the angular boxes. if the working temperature inside the dryer exceeds 150 degrees, or the temperature of corn more than 60 degrees, the quality of corn will be greatly affected. Corn dryer of Wangu Machinery Co., Ltd, select the technology of tempering process, alternating high and low temperature drying multi-level segment, the corn into the cooling section, after cooling, cooling grain to grain storage temperature, then discharged from the grain discharge section greatly to ensure the quality of maize, but also save energy, making breakage rate of corn to 3‰ or less.

Parameters

What We Can Offer

1)Whole turnkey project solution
included pre-cleaning machine,elevator,conveyor these essential equipment could also given from ourside
2)Plant design service
supply you all the possibly area required,the instllation diagram and draws for consideration
3)Instllation and commisioning service
professional engineer woud guide you for the assembling and commisioning of the machine
4)Full time online service
24 hours online technique service,ensure to solve the problem immediately
5)Enormous spare parts to support
easy broken spares and wearing parts would be send timely,no worry for drying season

Application

Contact Us

Tel:+86 551 63430788 Fax:+86 551 63430789

WhatsApp:+86 15395023670

Website:www.zgxsl.cn

Address:The cross of Tangkou and Jixian road,Taohua industry zone,Hefei,China