Copper-based boundary

FB08G bimetal loose graphite bearing

Model Number:bimetal loose graphite bearing
Type:sleeve
Material:Steel+brass+ptfe, Brass,Bronze,copper,steel back,stainless steel,aluminum alloy,bimetal
Bush types:Sleeve, ring, plate
Finishing:bronze-plating or tin-plating, without lead,no lead,Pb free
Technical:Oilite Phosphor,insert,cast,coat,sintered,powder,wrap,mould,mold
Features:Wear,Dry,Low Resistance,Harden,Maintenance Free
Lubricating:Covered with POM,PTFE,Graphite,carbon,Teflon,Dry,Oil,oilless,grease
color:black,red,yellow,white,blue,orange,gold,sliver

Application characteristics

FB08G bimetallic solid lubrication bearing is a novel thin-walled solid lubrication bearing made of JF800 bimetal material and alloy layer embedded with special solid lubricant. Due to the use of high-strength bearing alloy material as the matrix, the ideal filling material is anti-wear agent, reasonable diamond-shaped block lubrication design, lubrication area of more than 25%, so it can exert good lubricity and anti-wear performance.

Application range

Products have been used in automotive gearboxes, generators, elevators, cranes and metallurgical machinery.

Technical Parameters

Surface material: CuSn10Pb10+ graphite;

Bearing pressure: 65N/mm2;

Friction coefficient0.06~0.2;

Use temperature: 260C;

Sliding speed: 4m/s.

FB08G bimetal loose graphite bearing

Oilless sliding bearing refers to a special bearing

Oil-free bearings (oil-free plain bearings) are used for plain bearings. Oil-free lubricated bearings are designed for self-lubricating, oil-free bearings, smooth operation, reliable, and noise-free. Liquid lubrication conditions, separated from the lubricant does not directly contact the sliding surface, you can greatly reduce friction loss and surface wear, this film also has a certain degree of impact absorption.

But greater starting friction. The shaft portion of the bearing is called the shaft diameter portion, called the bush and the shaft diameter go together. In order to improve the friction bearing surface properties of the friction material of the inner surface layer of the casting, it is called a bearing lining.

The materials for the bearings and bearing linings are collectively referred to as bearing materials. Bearing applications typically load conditions, maintenance and lubrication or difficult operating areas at low speeds and weights.