Hot Sale Butterfly Valve PVC Wafer Type 4 Inch Electrical Water Valve
Product Description:
Butterfly Valve PVC Wafer Type 4 Inch Electrical Water Valve/IP67/Soft Sealed
Description:
Designed for versatility, the UPVC electric butterfly valve is an essential component for managing
the flow of various aggressive fluid mediums under low-pressure conditions and at room temperature.
Its lightweight and corrosion-resistant properties enable widespread application in piping systems for
drinking water, drainage, brine, and chemical solutions, ensuring reliable and efficient operation.
Specification:
Power supply | AC220V |
Valve size | DN50-300 |
Medium Temp | -15ºC ~ 60ºC(no congelation) |
Ambient Temp | -25ºC ~ 55ºC |
Body ratings | 1.0Mpa |
Action mode | Switch to cut off,0 ~ 90°gyration |
Action time | 4, 15, 30, 60S |
Protector | Overheat protection |
Body connections | Wafer, flange |
Body material | UPVC |
Seal material | PTFE,EPDM |
Actuator material | Casting aluminum alloy |
Applicable medium | Water, air, oil, corrosive chemical liquid |
Protection level | IP68 |
Installation mode | Install it in any angle(Prefer to horizontal or inclined installation to extend service life.) |
Installation Diagram
Valve size mm | Size (mm) | ||||||||
Length | D | D1-ANSI | D1-JIS | D1-DIN | H | n-d-ANSI | n-d-JIS | n-d-DIN | |
50 | 43 | 56.5 | 120.39 | 120 | 125 | 103 | 4-19 | 4-19 | 4-18 |
65 | 47.5 | 70 | 139.44 | 140 | 145 | 113 | 4-19 | 4-19 | 4-18 |
85 | 47.5 | 79 | 152.4 | 150 | 160 | 115 | 4-19 | 4-19 | 4-18 |
100 | 57.2 | 103 | 190.5 | 175 | 180 | 135 | 8-19 | 8-19 | 8-18 |
125 | 66 | 130 | 216 | 210 | 210 | 165 | 8-22 | 8-23 | 8-18 |
150 | 74 | 151 | 241.55 | 240 | 240 | 177 | 8-22 | 8-23 | 8-23 |
200 | 87.5 | 200 | 298.5 | 290 | 295 | 210 | 8-22 | 8-23 | 8-23 |
250 | 110 | 255 | 362 | 355 | 350 | 240 | 12-25 | 12-25 | 12-23 |
300 | 129 | 311 | 432 | 400 | 400 | 297 | 12-25 | 12-25 | 12-23 |
Note: Without standard accessories, above size is for references only, please consult with our technology department for the latest parameters due to product improvement and technology innovation.
Main properties specification
Valve size DN | 50-300(mm) | |||
Body ratings | PN (Mpa) | 0.6 | 1.0 | 1.6 |
Test properties pressure | Strength test | 0.9 | 1.5 | 2.4 |
Seal test | 0.66 | 1.1 | 1.76 | |
Air seal test | 0.6 | 0.6 | 0.6 |
Control Diagram
Packing & Shipping:
1.Packing: inner with bubble wrap,outer with cardboard box and wooden case.
2.Transportation:by sea, by air,by train.
If you have other requirements, please feel free to tell us.