IP67 Normal Temperature PVC Quick Open Ball Valve Drived by Electricity
Product Description:
PVC Quick Open Ball Valve Drived by Electricity/ IP67 /Fixed Ball Valve
UPVC Electric Ball Valve is widely applied in the industrial fields of acid, alkali and chemical solution.
The body with light weight and strong corrosion resistance is widely used in the piping system of pure water and raw drinking water, drainage and sewage, salt water and sea water.
Specification:
Power supply | AC220V ,AC24V |
Valve size | DN10-100 |
Medium Temp | -15°C~ 60°C(no congelation) |
Ambient Temp | -25°C~ 55°C |
Operating pressure | PN16 |
Action mode | Switch to cut off,0 ~ 90°gyration |
Action time | 4 ~ 30S |
Protector | Overheat protection |
Power consumption | 8VA ~ 30VA |
Body connections | Flange, inside thread |
Body material | UPVC |
Seal material | PTFE,EPDM |
Actuator material | Casting aluminum alloy, plastic shell |
Applicable medium | Water, air, oil, and corrosive chemical liquid |
Protection level | IP67 |
Installation mode | Install it in any angle. (Prefer to horizontal or inclined installation to extend the service life |
Figure and connection size
Size | ||||||||||||
Thread (G) |
A | A Adhesive interface |
B | C Thread connection |
C Adhesive interface |
D | E | F | G | H | L | φM |
3/8″ | 103 | 103 | 8.3 | 3/8″ | 16 | 36 | 31.5 | 24 | 24 | M4 | 63 | 10 |
1/2″ | 110 | 103 | 8.3 | 1/2″ | 20 | 36 | 31.5 | 24 | 24 | M4 | 63 | 15 |
3/4″ | 116 | 115 | 11 | 3/4″ | 25 | 43.5 | 36.5 | 25 | 31 | M4 | 73 | 20 |
1″ | 133 | 128 | 12.1 | 1″ | 32 | 51 | 45 | 27 | 40 | M5 | 90 | 25 |
1″1/4 | 145 | 146 | 14.5 | 1″1/4 | 40 | 59 | 52 | 32 | 41 | M5 | 104 | 32 |
1″1/2 | 165 | 164 | 15.5 | 1″1/2 | 50 | 68 | 56 | 28 | 53 | M6 | 112 | 40 |
2″ | 199 | 199 | 19 | 2″ | 63 | 82 | 67.5 | 34 | 58 | M6 | 135 | 50 |
2″1/2 | 236 | 235 | 23.2 | 2″1/2 | 75 | 115 | 79 | 45 | 84 | M6 | 105 | 65 |
3″ | 270 | 270 | 28.3 | 3″ | 90 | 138.5 | 100 | 55 | 102 | M8 | 126 | 80 |
4″ | 309 | 308 | 28.6 | 4″ | 110 | 162.5 | 115 | 50 | 122 | M8 | 147 |
The material for main parts
Material | |||
1. Shaft | PVC | 7. Ball seal ring | PTFE |
2. O-Ring | EPDM | 8. Ball core | PVC |
3. Ring nut | PVC | 9. O-Ring | EPDM |
4. Body | PVC | 10. Plug seal bracket | PVC |
5. The end | PVC | 11. Ring | PVC |
6. O-Ring | EPDM |
Control Diagram
Model | Circuit | Model | Circuit |
S | ON/OFF,no output signal | CPT | ON/OFF,output 4~20mA signal |
MS | ON/OFF,output passive contact signal | PCU | Regulation,output 4~20mA signal |
Packing & Shipping:
1.Packing: inner with bubble wrap,outer with cardboard box and wooden case.
2.Transportation:by sea, by air,by train.
If you have other requirements, please feel free to tell us.