Ultrafiltration system
Model | MR-UF-50TH |
membrane | MR-8060,25m2 |
membrane quantity | 24 pcs |
capacity | 50m3/hour |
power consume | 15kw/hour |
Uf water filter technology
In the ultrafiltration process, the aqueous solution flows under the pressure and flows through the surface of the membrane, which is smaller than the solvent (water) of the membrane pores and the small molecular solute permeable membrane, which becomes the purification liquid (filter solution), and the solute and solute group larger than the membrane pore. It is trapped and discharged with water to become a concentrate. The ultrafiltration process is dynamic filtration and the separation is done in a flowing state. The solute is only deposited on the surface of the membrane, and the ultrafiltration rate is attenuated to a certain extent and tends to be balanced, and can be recovered by washing.
Advantages
1. Runs automatically and controlled by PLC+ Touch screen.
2. When system encounter a fault, it will auto turn off and protect system.
3. Energy saving and low noise, no need to heat.
4. Auto backwashing, foward washing the UF membranes to increse service life.
5. system be equipped with chemical cleaning system, CIP.
6. Compact structure and saves installation place.
7. Individual setting on the touch screen to control the system.
8. Better wate flux design, with longer service life and lower mataince cost.