0.45mm EVA Solar Panel Encapsulation Film Production Line EVA Extruder 15m/min

1. Performance characteristics of Gwell EVA/POE film production line

(1) The cast extruder adopts EVA special single screw extrusion and POE special single screw extrusion. The screw barrel constant temperature circulating water cooling system solves the technical difficulties of EVA/POE plasticization and non-crosslinking.

(2) The roller body adopts double-sided embossing, and solves the technical difficulties of the film sticking to the roller.

(3) The cooling part adopts cooling rollers and stress-relieving cooling beds to make the film run smoothly and fully shaped to ensure that the shrinkage rate is less than 3%.

(4) The whole line adopts PLC automatic control to realize the operation of man-machine interface.

(5) The production line is equipped with an online quality monitoring and control system to ensure the product qualification rate.

(6) Patented design micro-tension winder, the line speed of the whole machine production line can reach 18m/min

2. Features of EVA solar film

1) High transparency and high adhesion can be applied to various interfaces and used for bonding glass and silicon wafers.

2) Good durability can resist high temperature, moisture, ultraviolet rays and so on.

3) Easy to store. Stored at room temperature, the adhesion of EVA is not affected by humidity and water-absorbent film.

3. Specification:

4. Technical support:

1. Technical team of Gwell sheet&board project are able to provide customers with technical support in raw materials, process, application and other aspects;

2. Strong equipment strength, providing the whole set of equipment to the industry in the shortest time;

3. Gwell is capable to customize equipment according to customer requirements;

4. We will be at the forefront of the effort to improve and upgrade equipment.