PS Three Layer Sheet Production Line PS Board Extrusion Machine Provide Installation And Commissioning

1. Gwell Company brief introduction

Thank you for visting China Gwell Machinery Company's website. We have many different kinds of plastic film, sheet and board extrusion lines. Gwell is a professional manufacturer of this kind of machine. We has developped for over 10 years, so far we have sold over hunfreds of this kind of machine to all over the world. Except the machine,we also provide customers with our good services. ABS sheet machine is one kind of common product that we can make. For cooling and forming, we equip with inclined three-roller calender. If you want to know more about this machine, please feel free to contact us.

2. Introduction of PS Three Layer Sheet Production Line

PS Three Layer Sheet Production Line, its impact strength is very good, and it can be used at extremely low temperatures. Excellent wear resistance, dimensional stability and oil resistance. ABS has higher creep resistance than PSF and PC, but lower than PA and POM. The heat distortion temperature of ABS is 93 to 118°C, but it can be increased by about 10°C after annealing. It also has a certain degree of toughness at -40°C and can be used in the temperature range of -40 to 100°C. PS Three Layer Sheet Production Line has high electrical insulation, is not easily affected by temperature and humidity, and can be used in most environments.

PS Three Layer Sheet Production Line is widely used in many fields, such as luggage, car body exterior panels, home decoration panels, bathroom panels, and plastic sheets.

3. Introduction of PS Three Layer Sheet Production Line

GWELL's PS Three Layer Sheet Production Line can produce multi-purpose PS Board Extrusion Machine with a thickness of 0.15mm-2mm. We use advanced machine manufacturing technology to make the machine run more smoothly and efficiently and reduce the failure rate. Our PS Board Extrusion Machine can also produce PS sheets. It can achieve the purpose of one machine with multiple functions.

4. The entire PS sheet production line consists of the following parts:

(1) Vacuum feeder: transport raw materials to the extruder

(2) Single screw extruder: plasticize raw materials and extrude molten raw materials

(3) Mold: according to customer requirements of the thickness range

(4) Three-roller calender: The diameter and length of the roller can be designed and manufactured according to customer requirements

(5) Cooling brackets: it is a cooling and conveying device

(6) Traction machine: use double pairs of rollers to haul the sheet

(7) Cutting unit: the role of cutting sheets

(8) Other auxiliary machines: chiller, air compressor, etc

5. Configuration of PS Three Layer Sheet Production Line: