Model | Voltage | HZ | Power (KW) | Power (HP) | Hmax (m) | Qmax (m³/h) | Port Size (inch/mm) |
FN-150 | 220V-240V | 50 | 1.1 | 1.5 | 18 | 35 | 2.0/63 |
FN-200 | 220V-240V | 50 | 1.5 | 2 | 18 | 35 | 2.0/63 |
FN-300 | 220V-240V | 50 | 2.2 | 3 | 20 | 40 | 2.0/63 |
FN-400 | 220V-240V | 50 | 3 | 4 | 20 | 43 | 2.5/75 |
FN-500 | 380V | 50 | 3.8 | 5 | 21 | 50 | 2.5/75 |
FN-550 | 380V | 50 | 4 | 5.5 | 22 | 60 | 2.5/75 |
FN-750 | 380V | 50 | 5.5 | 7.5 | 22 | 75 | 2.5/75 |
Features:
INSTALLATION
Only qualified licensed electrician should install pump and wiring.
IMPORTANT ELECTRICAL
Electrical Contractors Please Note: All 220/380 Volt 50Hz pumps must be wired to the main power
supply through an approved and correctly rated electrician.
PUMP MOUNT MUST
Be solid Level Rigid Vibration Free.
Allow use of short, direct suction pipe. (To reduce friction losses & don’t install the pump more
than 3M geometrical height from water level)
Allow for gate valves in suction and discharge piping.
Have adequate floor drainage to prevent flooding.
Be protected from excess moisture.
All adequate access for servicing pump and piping.
1. Excellent Flow rate suitable for spas and pools up to 2000 litres
2. Suitable for spas including Salt, Chorine, Inground and Above Ground
3. Corrosion Resistant and Chemical-resistant thermoplastic body
4. Tough durable construction for longer lasting life
5. Built-In Thermal Protection
6. Instruction manual for ease of installation and use.
7. Anti spin-off impeller.
8. A large see-through strainer, super-size debris basket.
9. Special design shockproof basement
10. Good quality and modern design
11. Low operation noise
12. Single or three phase
13. Anodized motor body
14. Huge pro-filter for less cleaning maintenance
Description: