FREESEA Solar Water Pump Deep Submersible Water Pump with MPPT Controller DC 24V Submersible
About this item
Pump, Deep Well Submersible Pump, 1Hp, 220V 60Hz, 30 Gpm, Stainless Steel, For 4" Or Bigger Well, Long Life
2 Wire Pump With Built In Control Box- Does Not Require External Control Box; Industrial Grade Heavy Duty, Good For Home Usage; Built In Thermal Protection
Country Of Origin : China
Submersible Pump
Why Choose Us
【LATEST MPPT CONTROLLER】The solar water pump controller drives the high efficient brush-less DC pump motor, utilizing the latest Maximum Power Point Tracking (MPPT) technology to ensure maximum flow is delivered under all light conditions. It also protects the submersible pump from frequent start up in low light conditions, overheating and running dry.
【MAIN PARAMETERS】Voltage: 24V, Input Power: 140W, Max Head: 164ft, Max Flow: 6 GPM, Bearing: NSK, Height: 19'', Outlet: 3/4'', Diameter: 3'', Motor: Brushless DC Pump Motor, Materials: Solar submersible pump for irrigation body: Stainless steel, Impeller of solar submersible pump for irrigation: Stainless steel, Package size: 19'' x 14'' x 6.5'', Shipping weight: 19lbs.
【INTELLIGENT SENSOR】Low water level sensors and tank full sensors are included so the pumping system can be fully automated. With sensors installed, the pump will switch off if the header tank is full or if the water source has fallen below the pump intake. Automatic restart when water returns to the well or when the motor temperature returns to the safety range. Easy installation, maintenance-free, safe and reliable.
【CONTROLLER PROTECTION】Electronic monitoring gives the controller the capability to monitor the system and automatically shut down in the event of: Dry well conditions with low level switch, Bound pump with auto-reversing torque, High voltage surge, Low input voltage, Open motor circuit, Short circuit, Over heat. Widely used for Irrigation/Automatic water sprinkler system, Garden fountains, Livestock/Living water supply, Water treatment systems, Large scale watering system for commercial.
Description
3.8" deep well submersible pump, fits in 4" or bigger well casing.
Built in starter box- Does not require external control (starter) box.
2 wire pump with 3-wires (2 wires + ground wire).
High quality UL approved motor for long life
Built in 1 HP capacitor start, and thermal protection switch.
This pump has a built in check valve.
1-1/4” NPT discharge (can go with any pipe size)
High efficiency, hermetically sealed motor is thermally protected to prevent overheating, and uses less energy.