Best Water Pump For Hydroponics and Aquaponics Circulation Hydroponic Water Pump

Description:

In order to ensure safety, all products are strictly inspected and tested, please according to the instructions for operation in case pumps are destroyed.

1. There is inside the pump or dirt into obstacles will reduce the effect of use of the product, if the pumps, pump out dirty cleaning of dirt.

2. Clean water pump, remove the front cover and waterleaf, with little brush or water, dirt, don't move pump shaft.

If the pump does not operate, according to the following verification:

1. Check whether the circuit is damaged, for another input to ensure that the pump power;

2. Ensure that the inlet without dirt;

3. Take out the rotor to ensure that the rotor is not damaged or blocked.

Attention:

1. Please power off before use;

2. Please don't burn;

3. Do not directly use the power line to pick up the pump;

4. Do not operate in hot water;

5. Work in clear water

When do you need a hydroponic water pump?

For some systems like traditional DWC, Wicking, you do not need a water pump. But for Aquaponics, and some other hydroponic systems like RDWC, Bubbleponics (two variations of the DWC), Ebb & Flow, Aeroponics, etc., a water pump is a must.

It plays a critical job for the system by moving water and providing nutes for your plants/fish.

You must distinguish between a water pump and an air pump. The role of the water pump is to pump water while the air pump aerates the water.

In other words, a water pump moves water and nutrients while an air pump infuses oxygen into the water system.

When you cannot get plant roots to come into contact with the water like the classic Deep Water Culture, you have to use a pump to flow water to your plants. Without water, your plants are bound to die in several hours.