Electric Self Priming Pressure Filter Swimming Pool Spa Circulation Water Pump

Features:

Single or three phase, Class F, IPX5.
Silent operation, Concise design.
Liquid temperature less than 60 degree.
Can resist chemical in swimming pool.
Nice performance, Overload protection.
Nichel plated antirust spindle or stainless steel 304 weld spindle.
Huge pro-filter for less cleaning maintenance.
Heighteen pump base to keep water pump off the moist working environment.
Arrange drain device of water pump.

Specifications:

* Rated power: 11000/15HP
* Max. Pump rate: 110m3/h
* Max. Head: 22m
* Max. Grain/ particle size: 2.5mm
* Max. Temperature of water handled: 80 degree Celsius
* Inner & outer pipe diameter: 90mm
* Length of cable: 1.2m
* Noise Level: <65dB
* Weight: 10kg

DURABLE: Constructed with longevity in mind and employs extensive use of corrosion-proof materials resistant to the elements along with all chemicals commonly associated with pool maintenance. 24/7 operation guaranteed.

QUALITY: Maintain a crystal clear and sparkling pool or spa that everybody loves with the New 2000W Electric Swimming Pool Pump. High-performance pump designed for above-ground and in-ground pools

NEVER run pump dry! Running pump dry may damage seals, causing leakage and flooding! Fill
pump with water before starting motor.

A smart pump controller packed with great specifications and features that make it perfect. Everything is made easy where it automatically switches your pump on/off on open/closing of any tap. It comes with a LED screen showing the live RPM, current, voltage, etc. It provides stable performance, requires low maintenance and is long lasting; it is one of the few that will exceed your expectations. Buy one today and have the best and most reliable equipment at hand.

WITH A FULL RANGE OF SIZES, they are IDEAL FOR SMALL, MEDIUM and LARGE spas – Our pumps start from the 0.5 HP for circulation pumps up to the 3HP for spa jets and a full range of sizes in between. Connection fittings for standard PVC 2inch (48.5mm) pipe.

HOW TO USE – It is best to always replace your pump with a pump of similar size and power rating. Changing over and fitting of the pump can be done by the handy person but it is recommended to get it done by a professional. Suitable as a direct replacement OR upgrade to existing pump.

NOTICE:

· Working fluid medium should be water or light density oil.

· Filter measures should be taken when used in foul water environment.

· Reversely connects the power polarity is not allowed

· Pump chamber should be cleaned regularly if the pump is not used for a Long-term.

· Operating voltage exceeds the rated voltage is not allowed.

· Only DC power can be used

· Environmental temperature and fluid temperature should be within the rated temperature.

· Working in the acid and alkali environment is not allowed. (The acid and alkali materials customized pump is exception)

· Running in the condition of the pump chamber without liquid is not allowed.

· This pump is not self-priming pump. It must be installed in a position below the liquid surface.