Model | Voltage | HZ | Power(KW) | Power(HP) | Hmax(m) | Qmax(m³/h) | Port Size(inch/mm) |
FL-150 | 220V-240V | 50/60 | 1.1 | 1.5 | 18 | 30 | 2.0/63 |
FL-200 | 220V-240V | 50/60 | 1.5 | 2 | 19 | 35 | 2.0/63 |
FL-300 | 220V-240V | 50/60 | 2.2 | 3 | 20 | 38 | 2.0/63 |
FL-350 | 220V-240V | 50/60 | 2.6 | 3.5 | 21 | 40 | 2.0/63 |
FL-400 | 380V | 50/60 | 3 | 4 | 22 | 48 | 2.0/63 |
Features:
1. Discharge valve or inlet fittings closed too much
2. Return pipes too small
3. Dirty filters
HIGH PUMP PRESSURE
1. Lower voltage
2. Motor winding connected with wrong voltage on dual voltage model
3. Poor ventilation environment
MOTOR OVERHEAT
1. Hairs or foreign plugged strainer
2. Worn motor bearings
3. Inlet or discharge valve partly plugged
4. Suction line partly plugged
5. Vacuum hose plugged or too small
6. Pump improper operating
NOISY PUMP AND MOTOR
1. Leakage or air from suction fittings, connections or valve system
2. Cleaning pre-filter
3. Low water level in pool
AIR BUBBLES AT INLET FITTING
Shaft seal requires replacement
LEAKAGE OF WATER AT SHAFT
If the recommendations in the fault analysis of this manual do not
solve your particular(s), please contact your local dealer for service
1) Magnificent flow rate and lift, the core energy of water circulating, 2~3m suction lift
2) Engineering plastic body, the pump can be effectively protected under bad weather,
long service life;
3) Seiko manufacturing, low noise during the pump working time;
4) Free-tool filter cover design, easy to maintenance;
5) IP55 protection level, with None-leaky design;
6) German technology IBC bearing, 100% copper wire motor, 24 hours running.
7) Anti-rust cast-aluminum motor cover, fast heat dissipation; PPO plastic steel material
impeller, resist high temperature and corrosion
8) Silicone sealing ring cover all watering section, enhance pump sealing system
9) CE certificated, reliable and safety