Wear And Corrosion Resistant Small Noisy Salt Swimming Pool Spa Water Pump

Description

This 3 HP 38000l/h water pump can improve significantly the water quality and clear swimming pools and whirlpools.

The pump has low consumption, high capacity and its operation are practically maintenance-free.
The motor and pump shaft does not come into contact with the swimming pool water.

The pump can be positioned max. 4m below the water level.

The swimming pool pump is the heart of a swimming pool system.

It is mounted directly in front of the filter vessel.

The pool pump draws the water from the skimmer to the pool and pushes the water through the filter medium.

Anti-rust crust can stop water penetrating theengine. Enough power, high head, big fluxand high efficient circulation. Smaller noiseand run quietly. The pump cover bears high airtight preventing the leaking. The main partof the pump is made of special plastic which isanti-high or low temperature So it is durable .Convenient to handle, easy to maintain, withthe supplyingof spare parts.

Working Conditions:

Medium temperature:5~50 C

Environment temperature:< 60 C2. Application :

FRE ESEA circulation&filtration pump canbe used for

aquaculture, water project, large sizeswimming pool,water park, etc.

Features :

1) Magnificent flow rate and lift, the core energy of water circulating, 2~3m suction lift

2) Engineering plastic body, pump can beeffectively protected under bad weather,long service life;

3) Seiko manufacturing, low noise duringthe pump working time;

4) Free-tool filter cover design, easy to maintenance;

5) IP55 protection level, with None-leakydesign;

6) German technology IBC bearing,100%copper wire motor, 24 hours running.

7) Anti rust cast-aluminum motor cover,fast heat dissipation;PPo plastic steel material impeller, resist high temperatureand corrosion

8) Silicone sealing ring, cover all wateringsection,enhance pump sealing system9) CE certificated, reliable and safety

Pump Use Precautions:

1. If the pump has any small faults, remember not to let it work. If the filler of the pump shaft is worn out, it should be added in time. If the pump is used continuously, it will leak. The direct effect of this is that the motor consumes more energy and can damage the impeller.

2. If the pump has a strong vibration during use, be sure to stop and check what is the cause, otherwise it will cause damage to the pump.

3. When the bottom valve of the pump leaks, some people will fill it into the inlet pipe of the pump with dry soil and flush it to the bottom of the valve. This is not desirable. Because when the dry soil is put into the water inlet pipe, when the water pump starts to work, the dry soil will enter the pump, which will damage the water pump impeller and the bearing, which shortens the service life of the water pump. When the bottom valve leaks, it must be repaired. If it is serious, it needs to be replaced.

4, the pump must pay attention to maintenance after use, for example, when the pump is used up, the water in the pump should be cleaned, it is best to remove the water pipe and then rinse with water.

5, the tape on the pump should also be removed, then rinse with water and dry in the light, do not put the tape in a dark and humid place. The tape of the pump must not be stained with oil, and do not apply some sticky material to the tape.

6. Carefully check the impeller for cracks. If the impeller is fixed on the bearing, if it is cracked or loose, it should be repaired in time. If there is mud on the pump impeller, it should be cleaned up.