15w Low Power Motor Pond Water Pump Flow Rate Adjustable Water Pump For Koi Fish

Paramerter:

Product Description:

♥ It's a versatile pump that can generate power waterfalls, filters, and fountain heads.
♥ Threaded fittings on nozzles make sure the joint between nozzle and pipe more sealed.
♥ Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 600L/H.
♥ Long enough cord for easy installation. 4 strong suction cups at the bottom of the pump help keep it in place, so you can stick it on the right side of the aquarium, either vertically or horizontally.
♥ No need any tools to detach it, easy to seperate, easy to clean Please clean it regularly about once every two months, or add some olive oil on the rotor.

Use And Maintenance:

1. You should make the pump working in the standard rotate speed in use process, don't speed up at will, in order to avoid potential safety hazard and impact the useful life of the pump.

2. Direct coupled type pump units:the chassis must remain stable, so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order to suction the water tank as the base)should be less than the permit smoking on 1-2meter high vacuum.

3. You should stop the engine if you discover abnormalities(such as noise, shock, hydraulic discharge descend etc.),and attention the bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop using it in case frost crack.After the pump every 1000 hours operating time, you should take down and clean the bearing, and exchange quick-wear parts.

Our Service:

We take customer needs very seriously. Tasks and challenges are solved together
with the customers - using our high expertise in product technologies, process
technologies and logistics. Our professionalism guides us through the development
and production process.

Knowing the customer is the priority of all we do.With the customers' specific
technical data and requirements fully in mind.We make a promise that every
process of the cooperation is clear. As production begins, we focus on working along
multiple lines. Even once the order has closed, MEDAS still provides meticulous
after-sales service.