Strong Suction Cups Energy Saving Pond Water Pump Centrifugal Submersible Pump

Paramerter:

Use And Maintenance:

1. You should make the pump working in the standard rotate speed in use process, don't speed up at will, in order to avoid potential safety hazard and impact the useful life of the pump.

2. Direct coupled type pump units:the chassis must remain stable, so as not to damage the coupling.
Belt wheel type pump units:the two pulleys must be aligned, the belt loose or tighten must be moderate. If the pump doesn't turn, it is generally because the impeller-ring get rusty, you can use the mallet knocking the coupling axially.Pump mounting height(in order to suction the water tank as the base)should be less than the permit smoking on 1-2meter high vacuum.

3. You should stop the engine if you discover abnormalities(such as noise, shock, hydraulic discharge descend etc.),and attention the bearing heat up, the temperature can't exceed 75°C.
If stop using for a long time, you should discharge the water in the pump, overhaul and oil, keep it in a dry and ventilate shade.
In winter, you should discharge the water at once when you stop using it in case frost crack.After the pump every 1000 hours operating time, you should take down and clean the bearing, and exchange quick-wear parts.

Application:

This product is used for pumping, And it can be widely used for various purposes.

Suitable for fish tank filter pump, skimming equipment power, aquarium landscaping, fountains, waterways, Waterfalls, etc.

Seafood holding tanks, aquarium circulating water supply and drainage.

Garden watering or cleaning equipment.

Sea water or acid and alkali liquid supply and emissions.

Our Service:

We take customer needs very seriously. Tasks and challenges are solved together
with the customers - using our high expertise in product technologies, process
technologies and logistics. Our professionalism guides us through the development
and production process.

Knowing the customer is the priority of all we do.With the customers' specific
technical data and requirements fully in mind.We make a promise that every
process of the cooperation is clear. As production begins, we focus on working along
multiple lines. Even once the order has closed, MEDAS still provides meticulous
after-sales service.