Model | Voltage | HZ | Power(KW) | Power(HP) | Hmax(m) | Qmax(m³/h) | Port Size(inch/mm) |
FL-150 | 220V-240V | 50/60 | 1.1 | 1.5 | 18 | 30 | 2.0/63 |
FL-200 | 220V-240V | 50/60 | 1.5 | 2 | 19 | 35 | 2.0/63 |
FL-300 | 220V-240V | 50/60 | 2.2 | 3 | 20 | 38 | 2.0/63 |
FL-350 | 220V-240V | 50/60 | 2.6 | 3.5 | 21 | 40 | 2.0/63 |
FL-400 | 380V | 50/60 | 3 | 4 | 22 | 48 | 2.0/63 |
Features:
1. Low virbation
2. Class F
3. Excellent performance
4. Big flow design
5. Ingress Protection: IP55
6. Stainless steel 304/316 weld shaft
7. Overload protection
8. Thermal protection
9. Fresh water/Sea water
PERFORMANCE: This Pool Pump takes care of cleaning, filtration and chlorine/salt distribution. features a removable strainer basket with a built-in thermal overload protection as the water circulates and passes through the filter leaves your pool clean.
DURABLE: Constructed with longevity in mind and employs extensive use of corrosion-proof materials resistant to the elements along with all chemicals commonly associated with pool maintenance. 24/7 operation guaranteed.
QUALITY: Maintain a crystal clear and sparkling pool or spa that everybody loves with the New 2000W Electric Swimming Pool Pump. High-performance pump designed for above-ground and in-ground pools
SAFETY: The pump has overheat and overload protections motor will automatically shut off if power supply to prevent overheating makes it very safe to use. It is able to control and also protect the pump against abnormal running situations.
1. Discharge valve or inlet fittings closed too much
2. Return pipes too small
3. Dirty filters
HIGH PUMP PRESSURE
1. Lower voltage
2. Motor winding connected with wrong voltage on dual voltage model
3. Poor ventilation environment
MOTOR OVERHEAT
1. Hairs or foreign plugged strainer
2. Worn motor bearings
3. Inlet or discharge valve partly plugged
4. Suction line partly plugged
5. Vacuum hose plugged or too small
6. Pump improper operating
NOISY PUMP AND MOTOR
1. Leakage or air from suction fittings, connections or valve system
2. Cleaning pre-filter
3. Low water level in pool
AIR BUBBLES AT INLET FITTING
Shaft seal requires replacement
LEAKAGE OF WATER AT SHAFT
If the recommendations in the fault analysis of this manual do not
solve your particular(s), please contact your local dealer for service
Description