Timing Belt Diaper Machine Spare Parts Gates Brand

1. No slippage during work, with accurate transmission ratio
Synchronous belt transmission is a kind of meshing transmission. Although the synchronous belt is an elastic body, because the load-bearing rope in it has the characteristic of not being stretched under the action of tension, it can keep the belt pitch constant and make the belt and the wheel cogging. It can mesh correctly, realize synchronous transmission without slip, and obtain accurate transmission ratio.
2. High transmission efficiency and good energy saving effect
Since the synchronous belt is used for non-sliding synchronous transmission, it has a higher transmission efficiency, generally up to 0.98. Compared with V-belt drive, it has obvious energy saving effect.
3. Large transmission ratio range and compact structure
The transmission ratio of the synchronous belt transmission can generally reach about 10, and in the case of a large transmission ratio, its structure is more compact than the V-belt transmission. Because the timing belt drive is a meshing drive, the pulley diameter is much smaller than the V-belt pulley that relies on friction to transmit power. In addition, because the timing belt does not require a large tension, the size of the pulley shaft and the bearing can be adjusted. Decrease. Therefore, compared with the V-belt drive, the synchronous belt drive has a more compact structure under the same transmission ratio.
4. Easy maintenance and low operating cost
Since the load-bearing rope in the timing belt is made of glass fiber, steel wire and other materials with low elongation, the belt elongation is very small during operation, and there is no need to adjust the tension force frequently like the V-belt and chain drive. In addition, the timing belt does not require any lubrication during operation, so maintenance is very convenient, and the operating cost is much lower than that of V-belts, chains, and gears.
5. Can still work under harsh environmental conditions
Although the synchronous belt drive has the above advantages compared with other drives, it has extremely strict requirements on the center distance during installation, and at the same time the manufacturing process is complicated and the manufacturing cost is high.