Multi Range Closed Loop Hall Effect Current Sensor Precision Current Transducer
TBC-HXS5 series multi range current sensor is a closed loop device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit, it provides accurate electronic measurement of DC, AC or pulsed currents.
Electrical data(Ta=25℃±5℃) |
Type Parameter | TBC10HXS5 | TBC20HXS5 | TBC30HXS5 | TBC50HXS5 | |
Rated input(Ipn) | 10 | 20 | 30 | 50 | A |
Measuringrange(Ip) | 30 | 60 | 90 | 150 | A |
Secondary Turns(Ns) | 1600±2 | 1600±2 | 1200±1 | 1000±1 | T |
Internal measuring resister | 100±0.1% | 50±0.1% | 25±0.1% | 12.5±0.1% | Ω |
Rated output voltage | 0.625±0.5% | 0.625±0.5% | 0.625±0.5% | 0.625±0.5% | V |
Supply voltage | +5±5% | V | |||
Power consumption | 20+Ip/Ns | mA | |||
Reference voltage | +2.5±0.4% | V | |||
Zero voltage | @ Ip=0 2.5±0.4% | V | |||
Offset voltage drift | @ -40~+85℃ ≤±0.5 | mV/℃ | |||
Linearity | @ Ip=0-±Ipn ≤0.1 | %FS | |||
Magnetic offset voltage | @Ip=3XIpn-0 ≤±0.5 | %Ipn | |||
di/dt accurately followed | >50 | A/µS | |||
Response time | @100A/μS,10%-90% ≤500 | nS | |||
Bandwidth | @ -1db DC~100 | KHZ | |||
Galvanic isolation | @ 50/60HZ,1min 2.5 | KV |
Applications |
Variable speed drives
Welding machine
Battery supplied applications
Uninterruptible Power Supplies (UPS)
Electrochemical
Mechanical dimension(for reference only) |
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm
Pin connections |
Item | Turns | N(A) | Vout(V) Rated putout Voltage | [mΩ] | [uH] | Connect point |
Single Phase | 1 | ±10(±20,±30,±50) | 2.5±0.625±0.5% | 0.05 | 0.025 | ![]() |
2 | ±5(±10,±15,±25) | 2.5±0.625±0.5% | 0.20 | 0.1 | ![]() | |
3 | ±2.5(±5,±7.5,±12.5) | 2.5±0.625±0.5% | 1.00 | 0.4 | ![]() |
Directions for use |
When the current will be measured goes through a sensor ,the voltage will be measured at the output end.
(Note: The false wiring may result in the damage of the sensor).
Custom design in the different rated input current and the output voltage available.
Standards |
General date |
Value | Unit | Symbol | |
Operating temperature | -40 to +85 | ºC | TA |
Storage temperature | -40 to +125 | ºC | TS |
Mass(approx) | 7 | g | M |
Characteristics chart |
Pulse current signal response characteristic Effects of impulse noise