Fiber to RJ45 converter SFP media converter 10G fiber optic media converter
Overview
The HD-10GMC-SFP+ is a copper to fiber 10Gbps Ethernet media converter based on IEEE 802.3an and IEEE 802.3ae. It equips one 10GBase-T RJ45 port and one pluggable transceiver slot. The HD-10GMC-SFP+ brings you the best and simplest solution for the 10G Ethernet conversion between copper wire and fiber. The media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly. With internal power unit, it provides good stability and reliability
Features
Transparent Link Pass Through
Auto-Negotiation (802.3u)
AutoCross™
Support Jumbo Frame
Transparent Transport and very low delay
Support ITUT prescribed DWDM/CWDM wavelength
Support hot plugging
Full State Led display
Easy installation
Technical specifications
Standards | IEEE802.3, IEEE 802.3an, IEEE 802.3ae, IEEE 802.3az |
Data Rate | 10 Gbps |
Fiber Port supported standards |
10GBase-SR 10GBase-LRM 10GBase-LR 10GBase-ER 10GBase-ZR direct attached 10G copper |
Cable assemblies |
both Class-I and Class-II fiber SFP+ modules SFP modules supporting WDM technology |
Fiber Port transmission distance | Up to 80Km |
Copper Port supported | 100m on Cat6a or higher UTP |
Status LEDs |
1G: Lit when FX/TP speed is 1000Mbps 10G: Lit when FX/TP speed is 10G bps Link: Lit when FX/TP connection is good. Blinks: when FX/TP data is transmitting. PWR:Lit when +5V power is coming up |
Dimensions(WxDxH) mm | 30×100×140mm |
Power |
External power: input 85~265VAC, 50/60Hz Output: 5V 3A |
Power Consumption | 10 watts(without module) |
Copper Port supported | 100m on Cat6a or higher UTP |
Environment | Operating Temp: 0 – 50℃ Storage Temp: -20 to +70℃ Operating Humidity: 5% to 95% (non condensing) Altitude: 0 – 10,000 feet |
Shipping Weight | 500g |
MTBF w/Power Supply | Greater than 41,660 hours (MIL-HDBK-217F) Greater than 114,580 hours |
MTBF w/o Power Supply | Greater than 250,000 hours (MIL-HDBK-217F) Greater than 687,000 hours |
Regulatory Compliance | FCC Class A, EN55022 Class A, EN55024, CE Mark |
Warranty | 3years |
Fiber Technical Specifications
10G Base-SR | 10G Base-LR | |
Connector type | LC | LC |
Fiber type | Multi-mode | Single-mode |
Wavelength | 850nm | 1310nm |
Max Distance | <300M | 10Km |
Min TX PWR | -6.0dBm | -8.2dBm |
Max TX PWR | -1.0dBm | -0.5dBm |
Sensitivity | < -11dBm | < -14.4dBm |
Link Budget | 5.0dBm | 6.2dBm |
10G Base-ER | 10G Base-ZR | |
Connector type | LC | LC |
Fiber type | Single-mode | Single-mode |
Wavelength | 1550nm | 1550nm |
Max Distance | 40Km | 80Km |
Min TX PWR | -4.7dBm | 0dBm |
Max TX PWR | 4dBm | 5dBm |
Sensitivity | < -15.8dBm | < -23dBm |
Link Budget | 11.1dBm | 23.0dBm |