IP30 Single-Mode SC Type Fiber Ethernet media converter 1310/1550nm

Features

• In conformity to IEEE 802.3 10 Base-T standard.
• In conformity to IEEE 802.3u 100 Base-TX/FX standard.
• Max. 2M buffer memory built in chip.
• Back pressure flow control for full duplex
• IEEE802.3 X and half duplex.
• Automatic identification of MDI/MDI-X cross line.
• High-performance1.4Gbps memory bandwidth.
• In conformity to safety code of FCC and 15 CLASS B and CE MARK.

Applications

• Optical fiber communications systems;
• Optical fiber access network;
• Optical fiber CATV.
• Optical fiber test equipments;
• Optical fiber data communications;

Description

10/100/1000m fiber optical media converter can convert Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 100km through optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabit IC from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and diagnose the failure of converters. GT Series Gigabit Converters could be used alone; but Converter Card should be inserted to 16 slots RACK supplied by G.T. Crop. which is suitable for the use of Network Centre.

Technical specification

1. Operating standards: IEEE802.3z/AB, 1000Base-T and 1000Base-SX/LX
2. MAC address table: 4K
3. Data Buffer: 256K
4. Connector: UTP: RJ-45,10/100/1000Mbps; Fiber: SC,1000Mbps
5. Cable :UTP cable: Cat 5e or Cat 6 (the max distance up to 100m); Fiber : multimode : 50/125, 62.5/125μm (the max distance up to 550/224m); singlemode : 8.3/125, 8.7/125, 9/125μm (the max distance up to 100km)
6. Flow control: Full Duplex: IEEE802.3x; Half Duplex: back pressure.
7. Power: AC 110-220V to DC 5V, DC 48V to DC 5V
8. Ambient temperature:0 ~ +50°C
9. Storage temperature:-20 ~ +70°C
10. Humidity:5% ~ 90%

Product list