Product Overview

It’s digital optical transmission system optimized for single-channel, which could compatible with the all-pattern video signal hold out 1-ch unilateralism signal at same orientation on one optical fiber. For obtained high quality transmission, the video signal adopted 8bit/10MHz digital sample technique full-digital transmitting channel. Power, optical video are easily inspected the indicators on the panels, so that the user could check the status visibly. The system series are high performance reliability transmission system for long distance of video

Product Features

8bit video signal digital sample
≤10 MHz video bandwidth, Compatible with NTSC, PAL and SECAM
Wide optical dynamic range, no user adjustments;
Transmission range up to 100km
Stand alone operation or mount in Model FHC-6000-4U chassis
Provide 1 reversed stereo audio and 1 reversed data transmission over same optical fiber

SMT technique

BNC video connector
FC/SC/ST optical connector

Product Usage

Closed circuit television supervisory system
Intelligent transportation supervisory system

Parameters for Related Data

Video performance:
Video bandwidth: 0–8MHz
Differential gain: < 1 (typical)
Differential phase: < 0.5°(typical)
Field tilt: < 0.5 (MAX)
SNR: > 60dB
Input/Output Impedance:75Ω (unbalanced)
Input/Output Volt:1.0Vpp(typical)

Data:
Channel: 1, Reversed
Data Rate: 0~~180Kbps/channel
Selectable RS-232/RS-422/RS-485
Connector: RJ45

Optical performance:
Transmission wavelength: 1310nm
optical interface: FC/SC/ST-PC
transmitting power: -4dB
Receiving sensitivity: -24dB
Optical dynamic range:18dB

Audio:
Channel: 1 stereo audio
Audio Input: unbalanced, 600Ohms
Digitization: 16bit@48k
Frequency: 10Hz to 20KHz
SNR: >70dB
Connector: RCA

Other Parameters:

Operating temperature: -40°C - +75°C

Operating Humidity: 0 - 95 (non-condensing)Power consumption: 1.8W @ DC5V
Dimension: 145*90 (mm) Card Type
125*119*27(mm) Standalone
weight: 0.5kgs
Mean Time Between Failures (MTBF):>100000 Hrs

Certification