Dual SFP + poe media converter 4 port gigabit Ethernet Industrial Switches
DESCRIPTION
The switches Unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on port 1. The switches are classified as power source equipment (PSE), and when used in this way, the HSW-ISGP switches enable centralization of the power supply and provide up to 15.4 watts of power per port. The switches can be used to power IEEE 802.3af compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
FEATURES
Ø Comply to IEE 802.3 10Base-T,IEEE802.3u ,100Base-TX/FX, 1000Base-TX/FX
Ø Provide a SC singlemode /multimode optical port and 10/100/1000M RJ45 port, support for Full/half duplex mode and auto MDI/MDI-X connection
Ø Comply to IEEE 802.3af , provide power for the IP cameras over Ethernet
Dynamic LED indicator, display the current
TECHINCAL SPECIFICATIONS
Standards: | IEEE Protocol 802.3 10Base-T Ethernet 802.3u 100Base-TX and 100Base-FX fast Ethernet 802.3x Flow Control and Back Pressure 802.1p Class of Service 802.1Q VLAN Tag 802.3ad LACP 802.1d STP 802.1w RSTP 802.1x |
Network management | Web-based, CLI, Telnet/serial console, windows utility and SNMP management OP Ring Protection: recovery time within 15ms Firmware upgrade: Web, online MAC address:8K |
Input Current: | IDS 508 : <0.24A@24VDC IDS 508-4F: <0.40A@24VDC Overload Current Protection: Present Reverse Polarity Protection: Present Connector: 6-contact terminal blocks |
Input Current: | IDS 508 : <0.24A@24VDC IDS 508-4F: <0.40A@24VDC Overload Current Protection: Present Reverse Polarity Protection: Present Connector: 6-contact terminal blocks |
RJ45 port rate: | 10/100BaseT(X) auto connection, F /H duplex or force work mode, and support MDI/MDI-X connection | Casing: | IP40 protection, Aluminium Alloy |
Fiber Ports: | 100/1000Base-FX ports (SC/ST connector, optional) | Instanation: | DIN-Rail or wall mounting |
Single-mode: | 20, 40,60, 80,100,120Km,optional | EMI | FCC Part 15, CISPR (EN55022) class A |
Multi-mode: | 2,5Km,optional | ||
Wavelength | 850nm, 1310 nm, 1550nm | ||
Typical 100Base-FX | 155Mbps, 1310nm, 2Km, average output≥-18dBm, sensitivity≤-35dBm |
EMS: | EN61000-4-2 (ESD),Level 3 |
EN61000-4-3 (RS),Level 3 | |||
EN61000-4-4 (EFT),Level 3 | |||
Single-mode:155Mbps, 1310nm, 20Km, average output≥-12dBm, sensitivity≤-36dBm |
EN61000-4-5 (Surge),Level 3 | ||
EN61000-4-6 (CS),Level 3 | |||
EN61000-4-8,Level 3 | |||
Warranty | 5 year | Shock: | IEC 60068-2-27 PASS |
Dimensions: | 60.5 x 118 x 140mm | Free Fall | IEC 60068-2-32 PASS |
Weight: | 720g | Vibration: | IEC 60068-2-6 PASS |